rcc: Rename TIMI2C -> TIMIC.

data/registers/rcc_h5.yaml

@@ -1449,11 +1449,11 @@ fieldset/CCIPR1:
     bit_offset: 27
     bit_size: 3
     enum: USARTSEL
-  - name: TIMI2CSEL
+  - name: TIMICSEL
     description: "TIM12, TIM15 and LPTIM2 input capture source selection\r Set and reset by software."
     bit_offset: 31
     bit_size: 1
-    enum: TIMI2CSEL
+    enum: TIMICSEL
 fieldset/CCIPR2:
   description: RCC kernel clock configuration register
   fields:
@@ -4121,7 +4121,7 @@ enum/SYSTICKSEL:
   - name: LSE
     description: lse_ck[1] selected as clock source
     value: 2
-enum/TIMI2CSEL:
+enum/TIMICSEL:
   bit_size: 1
   variants:
   - name: B_0x0

data/registers/rcc_h50.yaml

@@ -813,11 +813,11 @@ fieldset/CCIPR1:
     bit_offset: 6
     bit_size: 3
     enum: USARTSEL
-  - name: TIMI2CSEL
+  - name: TIMICSEL
     description: "TIM2, TIM3 and LPTIM2 input capture source selection\r Set and reset by software."
     bit_offset: 31
     bit_size: 1
-    enum: TIMI2CSEL
+    enum: TIMICSEL
 fieldset/CCIPR2:
   description: RCC kernel clock configuration register
   fields:
@@ -3162,7 +3162,7 @@ enum/SYSTICKSEL:
   - name: LSE
     description: lse_ck[1] selected as clock source
     value: 2
-enum/TIMI2CSEL:
+enum/TIMICSEL:
   bit_size: 1
   variants:
   - name: B_0x0

data/registers/rcc_u5.yaml

@@ -1617,11 +1617,11 @@ fieldset/CCIPR1:
     bit_offset: 26
     bit_size: 2
     enum: ICLKSEL
-  - name: TIMI2CSEL
+  - name: TIMICSEL
-    description: "Clocks sources for TIM16,TIM17 and LPTIM2 internal input capture\r When the TIMI2CSEL2 bit is set, the TIM16, TIM17 and LPTIM2 internal input capture can be connected either to HSI/256, MSI/4 or MSI/1024. Depending on TIMI2CSEL[1:0] value, MSI is either MSIK or MSIS.\r When TIMI2CSEL2 is cleared, the HSI, MSIK and MSIS clock sources cannot be selected as TIM16, TIM17 or LPTIM2 internal input capture.\r 0xx: HSI, MSIK and MSIS dividers disabled\r Note: The clock division must be disabled (TIMI2CSEL configured to 0xx) before selecting or changing a clock sources division."
+    description: "Clocks sources for TIM16,TIM17 and LPTIM2 internal input capture\r When the TIMICSEL2 bit is set, the TIM16, TIM17 and LPTIM2 internal input capture can be connected either to HSI/256, MSI/4 or MSI/1024. Depending on TIMICSEL[1:0] value, MSI is either MSIK or MSIS.\r When TIMICSEL2 is cleared, the HSI, MSIK and MSIS clock sources cannot be selected as TIM16, TIM17 or LPTIM2 internal input capture.\r 0xx: HSI, MSIK and MSIS dividers disabled\r Note: The clock division must be disabled (TIMICSEL configured to 0xx) before selecting or changing a clock sources division."
     bit_offset: 29
     bit_size: 3
-    enum: TIMI2CSEL
+    enum: TIMICSEL
 fieldset/CCIPR2:
   description: RCC peripherals independent clock configuration register 2
   fields:
@@ -4396,7 +4396,7 @@ enum/SYSTICKSEL:
   - name: LSE
     description: LSE selected
     value: 2
-enum/TIMI2CSEL:
+enum/TIMICSEL:
   bit_size: 3
   variants:
   - name: DISABLE

data/registers/rcc_wba.yaml

@@ -791,11 +791,11 @@ fieldset/CCIPR1:
     bit_offset: 22
     bit_size: 2
     enum: SYSTICKSEL
-  - name: TIMI2CSEL
+  - name: TIMICSEL
-    description: "Clocks sources for TIM16,TIM17 and LPTIM2 internal input capture \r When the TIMI2CSEL bit is set, the TIM16, TIM17 and LPTIM2 internal input capture can be connected to HSI/256. \r When TIMI2CSEL is cleared, the HSI, clock sources cannot be selected as TIM16, TIM17 or LPTIM2 internal input capture.\r Access can be secured by GTZC_TZSC TIM16SEC, TIM17SEC, or LPTIM2SEC. When secure, a non-secure read/write access is RAZ/WI. It does not generate an illegal access interrupt. This bit can be protected against unprivileged access when secure with RCC SPRIV or when non-secure with RCC NSPRIV.\r Note: The clock division must be disabled (TIMI2CSEL configured to 0) before selecting or changing a clock sources division."
+    description: "Clocks sources for TIM16,TIM17 and LPTIM2 internal input capture \r When the TIMICSEL bit is set, the TIM16, TIM17 and LPTIM2 internal input capture can be connected to HSI/256. \r When TIMICSEL is cleared, the HSI, clock sources cannot be selected as TIM16, TIM17 or LPTIM2 internal input capture.\r Access can be secured by GTZC_TZSC TIM16SEC, TIM17SEC, or LPTIM2SEC. When secure, a non-secure read/write access is RAZ/WI. It does not generate an illegal access interrupt. This bit can be protected against unprivileged access when secure with RCC SPRIV or when non-secure with RCC NSPRIV.\r Note: The clock division must be disabled (TIMICSEL configured to 0) before selecting or changing a clock sources division."
     bit_offset: 31
     bit_size: 1
-    enum: TIMI2CSEL
+    enum: TIMICSEL
 fieldset/CCIPR2:
   description: RCC peripherals independent clock configuration register 2
   fields:
@@ -1546,7 +1546,7 @@ enum/SYSTICKSEL:
   - name: LSE
     description: LSE selected
     value: 2
-enum/TIMI2CSEL:
+enum/TIMICSEL:
   bit_size: 1
   variants:
   - name: HSI