//
// Created by Guangzong Chen on 6/22/23.
//

#ifndef STM32U5XX_HAL_REG_ADC_H
#define STM32U5XX_HAL_REG_ADC_H
#include "stdint.h"
typedef struct {
    uint32_t adrdy : 1;  // ADC ready
    uint32_t eosmp : 1;  // End of sampling flag
    uint32_t eoc : 1;    // End of conversion flag
    uint32_t eos: 1;  // End of sequence flag
    uint32_t ovr: 1;  // ADC overrun
    uint32_t jeoc: 1;  // Injected channel end of conversion
    uint32_t jeos: 1;  // Injected channel end of sequence
    uint32_t awd1: 1;  // Analog watchdog 1 flag
    uint32_t awd2: 1;  // Analog watchdog 2 flag
    uint32_t awd3: 1;  // Analog watchdog 3 flag
    uint32_t res1: 2;  // Reserved
    uint32_t ldordy: 1; // ADC voltage regulator ready
    uint32_t res2: 19;  // Reserved
} reg_adc_isr_t;

typedef struct {
    uint32_t adrdyie : 1;  // ADC ready interrupt enable
    uint32_t eosmpie : 1;  // End of sampling interrupt enable
    uint32_t eocie : 1;    // End of conversion interrupt enable
    uint32_t eosie: 1;  // End of sequence interrupt enable
    uint32_t ovrie: 1;  // ADC overrun interrupt enable
    uint32_t jeocie: 1;  // Injected channel end of conversion interrupt enable
    uint32_t jeosie: 1;  // Injected channel end of sequence interrupt enable
    uint32_t awd1ie: 1;  // Analog watchdog 1 interrupt enable
    uint32_t awd2ie: 1;  // Analog watchdog 2 interrupt enable
    uint32_t awd3ie: 1;  // Analog watchdog 3 interrupt enable
    uint32_t res1: 22;  // Reserved
} reg_adc_ier_t;

typedef struct {
    uint32_t aden : 1;  // ADC enable command
    uint32_t addis : 1;  // ADC disable command
    uint32_t adstart : 1;  // ADC start conversion command
    uint32_t jadsstart : 1;  // ADC start conversion of injected channels command
    uint32_t adstp : 1;  // ADC stop conversion command
    uint32_t jadstp : 1;  // ADC stop conversion of injected channels command
    uint32_t res1: 10;  // Reserved
    uint32_t adcallin: 1;  // ADC calibration command
    uint32_t res2: 7;  // Reserved
    uint32_t cal_index: 4; // ADC calibration factor
    uint32_t advregen: 1; // ADC voltage regulator enable
    uint32_t deep_pwd: 1; // ADC deep power down enable
    uint32_t res3: 1; // Reserved
    uint32_t ad_cal: 1; // ADC calibration
};




#endif // STM32U5XX_HAL_REG_ADC_H