stm32-data/data/registers/ucpd_v1.yaml

---
block/UCPD:
  description: USB Power Delivery interface
  items:
    - name: CFGR1
      description: "configuration register 1 "
      byte_offset: 0
      fieldset: CFGR1
    - name: CFGR2
      description: "configuration register 2 "
      byte_offset: 4
      fieldset: CFGR2
    - name: CFGR3
      description: "configuration register 3 "
      byte_offset: 8
      fieldset: CFGR3
    - name: CR
      description: "control register "
      byte_offset: 12
      fieldset: CR
    - name: IMR
      description: "interrupt mask register "
      byte_offset: 16
      fieldset: IMR
    - name: SR
      description: "status register "
      byte_offset: 20
      fieldset: SR
    - name: ICR
      description: "interrupt clear register "
      byte_offset: 24
      fieldset: ICR
    - name: TX_ORDSETR
      description: "Tx ordered set type register "
      byte_offset: 28
      fieldset: TX_ORDSETR
    - name: TX_PAYSZR
      description: "Tx payload size register "
      byte_offset: 32
      fieldset: TX_PAYSZR
    - name: TXDR
      description: "Tx data register "
      byte_offset: 36
      fieldset: TXDR
    - name: RX_ORDSETR
      byte_offset: 40
      fieldset: RX_ORDSETR
    - name: RX_PAYSZR
      byte_offset: 44
      fieldset: RX_PAYSZR
    - name: RXDR
      byte_offset: 48
      fieldset: RXDR
    - name: RX_ORDEXTR1
      description: "Rx ordered set extension register 1 \t"
      byte_offset: 52
      fieldset: RX_ORDEXTR1
    - name: RX_ORDEXTR2
      description: "Rx ordered set extension register 2 \t"
      byte_offset: 56
      fieldset: RX_ORDEXTR2
    - name: IPVER
      description: UCPD IP ID register
      byte_offset: 1012
      access: Read
      fieldset: IPVER
    - name: IPID
      description: UCPD IP ID register
      byte_offset: 1016
      access: Read
      fieldset: IPID
    - name: MID
      description: UCPD IP ID register
      byte_offset: 1020
      access: Read
      fieldset: MID
fieldset/CFGR1:
  description: "configuration register 1 "
  fields:
    - name: HBITCLKDIV
      description: "Division ratio for producing half-bit clock\r The bitfield determines the division ratio (the bitfield value plus one) of a clk divider producing half-bit clock (hbit_clk)."
      bit_offset: 0
      bit_size: 6
    - name: IFRGAP
      description: "Division ratio for producing inter-frame gap timer clock\r The bitfield determines the division ratio (the bitfield value minus one) of a clk divider producing inter-frame gap timer clock (tInterFrameGap).\r The division ratio 15 is to apply for Tx clock at the USB PD 2.0 specification nominal value. The division ratios below 15 are to apply for Tx clock below nominal, and the division ratios above 15 for Tx clock above nominal."
      bit_offset: 6
      bit_size: 5
    - name: TRANSWIN
      description: "Transition window duration\r The bitfield determines the division ratio (the bitfield value minus one) of a hbit_clk divider producing tTransitionWindow interval.\r Set a value that produces an interval of 12 to 20 us, taking into account the clk frequency and the HBITCLKDIV[5:0] bitfield setting."
      bit_offset: 11
      bit_size: 5
    - name: PSC_USBPDCLK
      description: "Pre-scaler division ratio for generating clk\r The bitfield determines the division ratio of a kernel clock pre-scaler producing peripheral clock (clk).\r It is recommended to use the pre-scaler so as to set the clk frequency in the range from 6 to 9 MHz."
      bit_offset: 17
      bit_size: 3
      enum: PSC_USBPDCLK
    - name: RXORDSETEN
      description: "Receiver ordered set enable\r The bitfield determines the types of ordered sets that the receiver must detect. When set/cleared, each bit enables/disables a specific function:\r 0bxxxxxxxx1: SOP detect enabled\r 0bxxxxxxx1x: SOP' detect enabled\r 0bxxxxxx1xx: SOP'' detect enabled\r 0bxxxxx1xxx: Hard Reset detect enabled\r 0bxxxx1xxxx: Cable Detect reset enabled\r 0bxxx1xxxxx: SOP'_Debug enabled\r 0bxx1xxxxxx: SOP''_Debug enabled\r 0bx1xxxxxxx: SOP extension#1 enabled\r 0b1xxxxxxxx: SOP extension#2 enabled"
      bit_offset: 20
      bit_size: 9
    - name: TXDMAEN
      description: "Transmission DMA mode enable\r When set, the bit enables DMA mode for transmission."
      bit_offset: 29
      bit_size: 1
    - name: RXDMAEN
      description: "Reception DMA mode enable\r When set, the bit enables DMA mode for reception."
      bit_offset: 30
      bit_size: 1
    - name: UCPDEN
      description: "peripheral enable\r General enable of the peripheral.\r Upon disabling, the peripheral instantly quits any ongoing activity and all control bits and bitfields default to their reset values. They must be set to their desired values each time the peripheral transits from disabled to enabled state."
      bit_offset: 31
      bit_size: 1
fieldset/CFGR2:
  description: "configuration register 2 "
  fields:
    - name: RXFILTDIS
      description: "BMC decoder Rx pre-filter enable\r The sampling clock is that of the receiver (that is, after pre-scaler)."
      bit_offset: 0
      bit_size: 1
    - name: RXFILT2N3
      description: "BMC decoder Rx pre-filter sampling method\r Number of consistent consecutive samples before confirming a new value."
      bit_offset: 1
      bit_size: 1
    - name: FORCECLK
      description: Force ClkReq clock request
      bit_offset: 2
      bit_size: 1
    - name: WUPEN
      description: "Wakeup from Stop mode enable\r Setting the bit enables the ASYNC_INT signal."
      bit_offset: 3
      bit_size: 1
fieldset/CFGR3:
  description: "configuration register 3 "
  fields:
    - name: TRIM_CC1_RD
      description: SW trim value for Rd resistor on the CC1 line
      bit_offset: 0
      bit_size: 4
    - name: TRIM_CC1_RP
      description: SW trim value for Rp current sources on the CC1 line
      bit_offset: 9
      bit_size: 4
    - name: TRIM_CC2_RD
      description: SW trim value for Rd resistor on the CC2 line
      bit_offset: 16
      bit_size: 4
    - name: TRIM_CC2_RP
      description: SW trim value for Rp current sources on the CC2 line
      bit_offset: 25
      bit_size: 4
fieldset/CR:
  description: "control register "
  fields:
    - name: TXMODE
      description: "Type of Tx packet\r Writing the bitfield triggers the action as follows, depending on the value:\r Others: invalid\r From V1.1 of the USB PD specification, there is a counter defined for the duration of the BIST Carrier Mode 2. To quit this mode correctly (after the \"tBISTContMode\" delay), disable the peripheral (UCPDEN = 0)."
      bit_offset: 0
      bit_size: 2
      enum: TXMODE
    - name: TXSEND
      description: "Command to send a Tx packet\r The bit is cleared by hardware as soon as the packet transmission begins or is discarded."
      bit_offset: 2
      bit_size: 1
    - name: TXHRST
      description: "Command to send a Tx Hard Reset\r The bit is cleared by hardware as soon as the message transmission begins or is discarded."
      bit_offset: 3
      bit_size: 1
    - name: RXMODE
      description: "Receiver mode\r Determines the mode of the receiver.\r When the bit is set, RXORDSET behaves normally, RXDR no longer receives bytes yet the CRC checking still proceeds as for a normal message."
      bit_offset: 4
      bit_size: 1
    - name: PHYRXEN
      description: "USB Power Delivery receiver enable\r Both CC1 and CC2 receivers are disabled when the bit is cleared. Only the CC receiver selected via the PHYCCSEL bit is enabled when the bit is set."
      bit_offset: 5
      bit_size: 1
    - name: PHYCCSEL
      description: "CC1/CC2 line selector for USB Power Delivery signaling\r The selection depends on the cable orientation as discovered at attach."
      bit_offset: 6
      bit_size: 1
      enum: PHYCCSEL
    - name: ANASUBMODE
      description: "Analog PHY sub-mode\r Refer to TYPEC_VSTATE_CCx for the effect of this bitfield."
      bit_offset: 7
      bit_size: 2
    - name: ANAMODE
      description: "Analog PHY operating mode\r The use of CC1 and CC2 depends on CCENABLE. Refer to ANAMODE, ANASUBMODE and link with TYPEC_VSTATE_CCx for the effect of this bitfield in conjunction with ANASUBMODE[1:0]."
      bit_offset: 9
      bit_size: 1
      enum: ANAMODE
    - name: CCENABLE
      description: "CC line enable\r This bitfield enables CC1 and CC2 line analog PHYs (pull-ups and pull-downs) according to ANAMODE and ANASUBMODE[1:0] setting.\r A single line PHY can be enabled when, for example, the other line is driven by VCONN via an external VCONN switch. Enabling both PHYs is the normal usage for sink/source."
      bit_offset: 10
      bit_size: 2
      enum: CCENABLE
    - name: CC1VCONNEN
      description: VCONN switch enable for CC1
      bit_offset: 13
      bit_size: 1
    - name: CC2VCONNEN
      description: VCONN switch enable for CC2
      bit_offset: 14
      bit_size: 1
    - name: DBATTEN
      description: "Dead battery function enable\r The bit takes effect upon setting the USBPDstrobe bit of the SYS_CONFIG register.\r Dead battery function only operates if the external circuit is appropriately configured."
      bit_offset: 15
      bit_size: 1
    - name: FRSRXEN
      description: "FRS event detection enable\r Setting the bit enables FRS Rx event (FRSEVT) detection on the CC line selected through the PHYCCSEL bit. 0: Disable\r Clear the bit when the device is attached to an FRS-incapable source/sink."
      bit_offset: 16
      bit_size: 1
    - name: FRSTX
      description: "FRS Tx signaling enable.\r Setting the bit enables FRS Tx signaling.\r The bit is cleared by hardware after a delay respecting the USB Power Delivery specification Revision 3.0."
      bit_offset: 17
      bit_size: 1
    - name: RDCH
      description: "Rdch condition drive\r The bit drives Rdch condition on the CC line selected through the PHYCCSEL bit (thus associated with VCONN), by remaining set during the source-only UnattachedWait.SRC state, to respect the Type-C state. Refer to \"USB Type-C ECN for Source VCONN Discharge\". The CCENABLE[1:0] bitfield must be set accordingly, too."
      bit_offset: 18
      bit_size: 1
    - name: CC1TCDIS
      description: "CC1 Type-C detector disable\r The bit disables the Type-C detector on the CC1 line.\r When enabled, the Type-C detector for CC1 is configured through ANAMODE and ANASUBMODE[1:0]."
      bit_offset: 20
      bit_size: 1
    - name: CC2TCDIS
      description: "CC2 Type-C detector disable\r The bit disables the Type-C detector on the CC2 line.\r When enabled, the Type-C detector for CC2 is configured through ANAMODE and ANASUBMODE[1:0]."
      bit_offset: 21
      bit_size: 1
fieldset/ICR:
  description: "interrupt clear register "
  fields:
    - name: TXMSGDISCCF
      description: "Tx message discard flag (TXMSGDISC) clear\r Setting the bit clears the TXMSGDISC flag in the SR register."
      bit_offset: 1
      bit_size: 1
    - name: TXMSGSENTCF
      description: "Tx message send flag (TXMSGSENT) clear\r Setting the bit clears the TXMSGSENT flag in the SR register."
      bit_offset: 2
      bit_size: 1
    - name: TXMSGABTCF
      description: "Tx message abort flag (TXMSGABT) clear\r Setting the bit clears the TXMSGABT flag in the SR register."
      bit_offset: 3
      bit_size: 1
    - name: HRSTDISCCF
      description: "Hard reset discard flag (HRSTDISC) clear\r Setting the bit clears the HRSTDISC flag in the SR register."
      bit_offset: 4
      bit_size: 1
    - name: HRSTSENTCF
      description: "Hard reset send flag (HRSTSENT) clear\r Setting the bit clears the HRSTSENT flag in the SR register."
      bit_offset: 5
      bit_size: 1
    - name: TXUNDCF
      description: "Tx underflow flag (TXUND) clear\r Setting the bit clears the TXUND flag in the SR register."
      bit_offset: 6
      bit_size: 1
    - name: RXORDDETCF
      description: "Rx ordered set detect flag (RXORDDET) clear\r Setting the bit clears the RXORDDET flag in the SR register."
      bit_offset: 9
      bit_size: 1
    - name: RXHRSTDETCF
      description: "Rx Hard Reset detect flag (RXHRSTDET) clear\r Setting the bit clears the RXHRSTDET flag in the SR register."
      bit_offset: 10
      bit_size: 1
    - name: RXOVRCF
      description: "Rx overflow flag (RXOVR) clear\r Setting the bit clears the RXOVR flag in the SR register."
      bit_offset: 11
      bit_size: 1
    - name: RXMSGENDCF
      description: "Rx message received flag (RXMSGEND) clear\r Setting the bit clears the RXMSGEND flag in the SR register."
      bit_offset: 12
      bit_size: 1
    - name: TYPECEVT1CF
      description: "Type-C CC1 event flag (TYPECEVT1) clear\r Setting the bit clears the TYPECEVT1 flag in the SR register"
      bit_offset: 14
      bit_size: 1
    - name: TYPECEVT2CF
      description: "Type-C CC2 line event flag (TYPECEVT2) clear\r Setting the bit clears the TYPECEVT2 flag in the SR register"
      bit_offset: 15
      bit_size: 1
    - name: FRSEVTCF
      description: "FRS event flag (FRSEVT) clear\r Setting the bit clears the FRSEVT flag in the SR register."
      bit_offset: 20
      bit_size: 1
fieldset/IMR:
  description: "interrupt mask register "
  fields:
    - name: TXISIE
      description: TXIS interrupt enable
      bit_offset: 0
      bit_size: 1
    - name: TXMSGDISCIE
      description: TXMSGDISC interrupt enable
      bit_offset: 1
      bit_size: 1
    - name: TXMSGSENTIE
      description: TXMSGSENT interrupt enable
      bit_offset: 2
      bit_size: 1
    - name: TXMSGABTIE
      description: TXMSGABT interrupt enable
      bit_offset: 3
      bit_size: 1
    - name: HRSTDISCIE
      description: HRSTDISC interrupt enable
      bit_offset: 4
      bit_size: 1
    - name: HRSTSENTIE
      description: HRSTSENT interrupt enable
      bit_offset: 5
      bit_size: 1
    - name: TXUNDIE
      description: TXUND interrupt enable
      bit_offset: 6
      bit_size: 1
    - name: RXNEIE
      description: RXNE interrupt enable
      bit_offset: 8
      bit_size: 1
    - name: RXORDDETIE
      description: RXORDDET interrupt enable
      bit_offset: 9
      bit_size: 1
    - name: RXHRSTDETIE
      description: RXHRSTDET interrupt enable
      bit_offset: 10
      bit_size: 1
    - name: RXOVRIE
      description: RXOVR interrupt enable
      bit_offset: 11
      bit_size: 1
    - name: RXMSGENDIE
      description: RXMSGEND interrupt enable
      bit_offset: 12
      bit_size: 1
    - name: TYPECEVT1IE
      description: TYPECEVT1 interrupt enable
      bit_offset: 14
      bit_size: 1
    - name: TYPECEVT2IE
      description: TYPECEVT2 interrupt enable
      bit_offset: 15
      bit_size: 1
    - name: FRSEVTIE
      description: FRSEVT interrupt enable
      bit_offset: 20
      bit_size: 1
fieldset/IPID:
  description: UCPD IP ID register
  fields:
    - name: IPID
      description: IPID
      bit_offset: 0
      bit_size: 32
fieldset/IPVER:
  description: UCPD IP ID register
  fields:
    - name: IPVER
      description: IPVER
      bit_offset: 0
      bit_size: 32
fieldset/MID:
  description: UCPD IP ID register
  fields:
    - name: IPID
      description: IPID
      bit_offset: 0
      bit_size: 32
fieldset/RXDR:
  fields:
    - name: RXDATA
      description: Data byte received
      bit_offset: 0
      bit_size: 8
fieldset/RX_ORDEXTR1:
  description: "Rx ordered set extension register 1 \t"
  fields:
    - name: RXSOPX1
      description: "Ordered set 1 received\r The bitfield contains a full 20-bit sequence received, consisting of four K‑codes, each of five bits. The bit 0 (bit 0 of K‑code1) is receive first, the bit 19 (bit 4 of K‑code4) last."
      bit_offset: 0
      bit_size: 20
fieldset/RX_ORDEXTR2:
  description: "Rx ordered set extension register 2 \t"
  fields:
    - name: RXSOPX2
      description: "Ordered set 2 received\r The bitfield contains a full 20-bit sequence received, consisting of four K‑codes, each of five bits. The bit 0 (bit 0 of K‑code1) is receive first, the bit 19 (bit 4 of K‑code4) last."
      bit_offset: 0
      bit_size: 20
fieldset/RX_ORDSETR:
  fields:
    - name: RXORDSET
      description: Rx ordered set code detected
      bit_offset: 0
      bit_size: 3
      enum: RXORDSET
    - name: RXSOP3OF4
      description: The bit indicates the number of correct K‑codes. For debug purposes only.
      bit_offset: 3
      bit_size: 1
    - name: RXSOPKINVALID
      description: "The bitfield is for debug purposes only.\r Others: Invalid"
      bit_offset: 4
      bit_size: 3
      enum: RXSOPKINVALID
fieldset/RX_PAYSZR:
  fields:
    - name: RXPAYSZ
      description: "Rx payload size received\r This bitfield contains the number of bytes of a payload (including header but excluding CRC) received: each time a new data byte is received in the RXDR register, the bitfield value increments and the RXMSGEND flag is set (and an interrupt generated if enabled).\r The bitfield may return a spurious value when a byte reception is ongoing (the RXMSGEND flag is low)."
      bit_offset: 0
      bit_size: 10
fieldset/SR:
  description: "status register "
  fields:
    - name: TXIS
      description: "Transmit interrupt status\r The flag indicates that the TXDR register is empty and new data write is required (as the amount of data sent has not reached the payload size defined in the TXPAYSZ bitfield). The flag is cleared with the data write into the TXDR register."
      bit_offset: 0
      bit_size: 1
    - name: TXMSGDISC
      description: "Message transmission discarded\r The flag indicates that a message transmission was dropped. The flag is cleared by setting the TXMSGDISCCF bit.\r Transmission of a message can be dropped if there is a concurrent receive in progress or at excessive noise on the line. After a Tx message is discarded, the flag is only raised when the CC line becomes idle."
      bit_offset: 1
      bit_size: 1
    - name: TXMSGSENT
      description: "Message transmission completed\r The flag indicates the completion of packet transmission. It is cleared by setting the TXMSGSENTCF bit.\r In the event of a message transmission interrupted by a Hard Reset, the flag is not raised."
      bit_offset: 2
      bit_size: 1
    - name: TXMSGABT
      description: "Transmit message abort\r The flag indicates that a Tx message is aborted due to a subsequent Hard Reset message send request taking priority during transmit. It is cleared by setting the TXMSGABTCF bit."
      bit_offset: 3
      bit_size: 1
    - name: HRSTDISC
      description: "Hard Reset discarded\r The flag indicates that the Hard Reset message is discarded. The flag is cleared by setting the HRSTDISCCF bit."
      bit_offset: 4
      bit_size: 1
    - name: HRSTSENT
      description: "Hard Reset message sent\r The flag indicates that the Hard Reset message is sent. The flag is cleared by setting the HRSTSENTCF bit."
      bit_offset: 5
      bit_size: 1
    - name: TXUND
      description: "Tx data underrun detection\r The flag indicates that the Tx data register (TXDR) was not written in time for a transmit message to execute normally. It is cleared by setting the TXUNDCF bit."
      bit_offset: 6
      bit_size: 1
    - name: RXNE
      description: "Receive data register not empty detection\r The flag indicates that the RXDR register is not empty. It is automatically cleared upon reading RXDR."
      bit_offset: 8
      bit_size: 1
    - name: RXORDDET
      description: "Rx ordered set (4 K-codes) detection\r The flag indicates the detection of an ordered set. The relevant information is stored in the RXORDSET[2:0] bitfield of the RX_ORDSET register. It is cleared by setting the RXORDDETCF bit."
      bit_offset: 9
      bit_size: 1
    - name: RXHRSTDET
      description: "Rx Hard Reset receipt detection\r The flag indicates the receipt of valid Hard Reset message. It is cleared by setting the RXHRSTDETCF bit."
      bit_offset: 10
      bit_size: 1
    - name: RXOVR
      description: "Rx data overflow detection\r The flag indicates Rx data buffer overflow. It is cleared by setting the RXOVRCF bit.\r The buffer overflow can occur if the received data are not read fast enough."
      bit_offset: 11
      bit_size: 1
    - name: RXMSGEND
      description: "Rx message received\r The flag indicates whether a message (except Hard Reset message) has been received, regardless the CRC value. The flag is cleared by setting the RXMSGENDCF bit.\r The RXERR flag set when the RXMSGEND flag goes high indicates errors in the last-received message."
      bit_offset: 12
      bit_size: 1
    - name: RXERR
      description: "Receive message error\r The flag indicates errors of the last Rx message declared (via RXMSGEND), such as incorrect CRC or truncated message (a line becoming static before EOP is met). It is asserted whenever the RXMSGEND flag is set."
      bit_offset: 13
      bit_size: 1
    - name: TYPECEVT1
      description: "Type-C voltage level event on CC1 line\r The flag indicates a change of the TYPEC_VSTATE_CC1[1:0] bitfield value, which corresponds to a new Type-C event. It is cleared by setting the TYPECEVT2CF bit."
      bit_offset: 14
      bit_size: 1
    - name: TYPECEVT2
      description: "Type-C voltage level event on CC2 line\r The flag indicates a change of the TYPEC_VSTATE_CC2[1:0] bitfield value, which corresponds to a new Type-C event. It is cleared by setting the TYPECEVT2CF bit."
      bit_offset: 15
      bit_size: 1
    - name: TYPEC_VSTATE_CC1
      description: "The status bitfield indicates the voltage level on the CC1 line in its steady state.\r The voltage variation on the CC1 line during USB PD messages due to the BMC PHY modulation does not impact the bitfield value."
      bit_offset: 16
      bit_size: 2
      enum: TYPEC_VSTATE_CC
    - name: TYPEC_VSTATE_CC2
      description: "CC2 line voltage level\r The status bitfield indicates the voltage level on the CC2 line in its steady state.\r The voltage variation on the CC2 line during USB PD messages due to the BMC PHY modulation does not impact the bitfield value."
      bit_offset: 18
      bit_size: 2
      enum: TYPEC_VSTATE_CC
    - name: FRSEVT
      description: "FRS detection event\r The flag is cleared by setting the FRSEVTCF bit."
      bit_offset: 20
      bit_size: 1
fieldset/TXDR:
  description: "Tx data register "
  fields:
    - name: TXDATA
      description: Data byte to transmit
      bit_offset: 0
      bit_size: 8
fieldset/TX_ORDSETR:
  description: "Tx ordered set type register "
  fields:
    - name: TXORDSET
      description: "Ordered set to transmit\r The bitfield determines a full 20-bit sequence to transmit, consisting of four K-codes, each of five bits, defining the packet to transmit. The bit 0 (bit 0 of K-code1) is the first, the bit 19 (bit 4 of K‑code4) the last."
      bit_offset: 0
      bit_size: 20
fieldset/TX_PAYSZR:
  description: "Tx payload size register "
  fields:
    - name: TXPAYSZ
      description: "Payload size yet to transmit\r The bitfield is modified by software and by hardware. It contains the number of bytes of a payload (including header but excluding CRC) yet to transmit: each time a data byte is written into the TXDR register, the bitfield value decrements and the TXIS bit is set, except when the bitfield value reaches zero. The enumerated values are standard payload sizes before the start of transmission."
      bit_offset: 0
      bit_size: 10
enum/ANAMODE:
  bit_size: 1
  variants:
    - name: Source
      description: Source
      value: 0
    - name: Sink
      description: Sink
      value: 1
enum/CCENABLE:
  bit_size: 2
  variants:
    - name: Disabled
      description: "Disable both PHYs "
      value: 0
    - name: Cc1
      description: Enable CC1 PHY
      value: 1
    - name: Cc2
      description: Enable CC2 PHY
      value: 2
    - name: Both
      description: Enable CC1 and CC2 PHY
      value: 3
enum/PHYCCSEL:
  bit_size: 1
  variants:
    - name: Cc1
      description: Use CC1 IO for Power Delivery communication
      value: 0
    - name: Cc2
      description: Use CC2 IO for Power Delivery communication
      value: 1
enum/RXORDSET:
  bit_size: 3
  variants:
    - name: Sop
      description: SOP code detected in receiver
      value: 0
    - name: SopPrime
      description: "SOP' code detected in receiver"
      value: 1
    - name: SopDoublePrime
      description: "SOP'' code detected in receiver"
      value: 2
    - name: SopPrimeDebug
      description: "SOP'_Debug detected in receiver"
      value: 3
    - name: SopDoublePrimeDebug
      description: "SOP''_Debug detected in receiver"
      value: 4
    - name: CableReset
      description: Cable Reset detected in receiver
      value: 5
    - name: Ext1
      description: "SOP extension#1 detected in receiver"
      value: 6
    - name: Ext2
      description: "SOP extension#2 detected in receiver"
      value: 7
enum/RXSOPKINVALID:
  bit_size: 3
  variants:
    - name: None
      description: No K‑code corrupted
      value: 0
    - name: First
      description: First K‑code corrupted
      value: 1
    - name: Second
      description: Second K‑code corrupted
      value: 2
    - name: Third
      description: Third K‑code corrupted
      value: 3
    - name: Fourth
      description: Fourth K‑code corrupted
      value: 4
enum/TXMODE:
  bit_size: 2
  variants:
    - name: Packet
      description: Transmission of Tx packet previously defined in other registers
      value: 0
    - name: CableReset
      description: Cable Reset sequence
      value: 1
    - name: Bist
      description: BIST test sequence (BIST Carrier Mode 2)
      value: 2
enum/TYPEC_VSTATE_CC:
  bit_size: 2
  variants:
    - name: Lowest
      description: Lowest
      value: 0
    - name: Low
      description: Low
      value: 1
    - name: High
      description: High
      value: 2
    - name: Highest
      description: Highest
      value: 3
enum/PSC_USBPDCLK:
  bit_size: 3
  variants:
    - name: Div1
      description: 1 (bypass)
      value: 0
    - name: Div2
      description: "2"
      value: 1
    - name: Div4
      description: "4"
      value: 2
    - name: Div8
      description: "8"
      value: 3
    - name: Div16
      description: "16"
      value: 4