stm32-data/data/registers/tamp_h5.yaml
2024-02-21 16:45:00 +08:00

1314 lines
55 KiB
YAML
Raw Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

block/TAMP:
description: Tamper and backup.
items:
- name: CR1
description: TAMP control register 1.
byte_offset: 0
fieldset: CR1
- name: CR2
description: TAMP control register 2.
byte_offset: 4
fieldset: CR2
- name: CR3
description: TAMP control register 3.
byte_offset: 8
fieldset: CR3
- name: FLTCR
description: TAMP filter control register.
byte_offset: 12
fieldset: FLTCR
- name: ATCR1
description: TAMP active tamper control register 1.
byte_offset: 16
fieldset: ATCR1
- name: ATSEEDR
description: TAMP active tamper seed register.
byte_offset: 20
fieldset: ATSEEDR
- name: ATOR
description: TAMP active tamper output register.
byte_offset: 24
fieldset: ATOR
- name: ATCR2
description: TAMP active tamper control register 2.
byte_offset: 28
fieldset: ATCR2
- name: SECCFGR
description: TAMP secure mode register.
byte_offset: 32
fieldset: SECCFGR
- name: PRIVCFGR
description: TAMP privilege mode control register.
byte_offset: 36
fieldset: PRIVCFGR
- name: IER
description: TAMP interrupt enable register.
byte_offset: 44
fieldset: IER
- name: SR
description: TAMP status register.
byte_offset: 48
fieldset: SR
- name: MISR
description: TAMP non-secure masked interrupt status register.
byte_offset: 52
fieldset: MISR
- name: SMISR
description: TAMP secure masked interrupt status register.
byte_offset: 56
fieldset: SMISR
- name: SCR
description: TAMP status clear register.
byte_offset: 60
fieldset: SCR
- name: COUNT1R
description: TAMP monotonic counter 1 register.
byte_offset: 64
fieldset: COUNT1R
- name: OR
description: TAMP option register.
byte_offset: 80
fieldset: OR
- name: ERCFGR
description: TAMP erase configuration register.
byte_offset: 84
fieldset: ERCFGR
- name: BKP0R
description: TAMP backup 0 register.
byte_offset: 256
fieldset: BKP0R
- name: BKP1R
description: TAMP backup 1 register.
byte_offset: 260
fieldset: BKP1R
- name: BKP2R
description: TAMP backup 2 register.
byte_offset: 264
fieldset: BKP2R
- name: BKP3R
description: TAMP backup 3 register.
byte_offset: 268
fieldset: BKP3R
- name: BKP4R
description: TAMP backup 4 register.
byte_offset: 272
fieldset: BKP4R
- name: BKP5R
description: TAMP backup 5 register.
byte_offset: 276
fieldset: BKP5R
- name: BKP6R
description: TAMP backup 6 register.
byte_offset: 280
fieldset: BKP6R
- name: BKP7R
description: TAMP backup 7 register.
byte_offset: 284
fieldset: BKP7R
- name: BKP8R
description: TAMP backup 8 register.
byte_offset: 288
fieldset: BKP8R
- name: BKP9R
description: TAMP backup 9 register.
byte_offset: 292
fieldset: BKP9R
- name: BKP10R
description: TAMP backup 10 register.
byte_offset: 296
fieldset: BKP10R
- name: BKP11R
description: TAMP backup 11 register.
byte_offset: 300
fieldset: BKP11R
- name: BKP12R
description: TAMP backup 12 register.
byte_offset: 304
fieldset: BKP12R
- name: BKP13R
description: TAMP backup 13 register.
byte_offset: 308
fieldset: BKP13R
- name: BKP14R
description: TAMP backup 14 register.
byte_offset: 312
fieldset: BKP14R
- name: BKP15R
description: TAMP backup 15 register.
byte_offset: 316
fieldset: BKP15R
- name: BKP16R
description: TAMP backup 16 register.
byte_offset: 320
fieldset: BKP16R
- name: BKP17R
description: TAMP backup 17 register.
byte_offset: 324
fieldset: BKP17R
- name: BKP18R
description: TAMP backup 18 register.
byte_offset: 328
fieldset: BKP18R
- name: BKP19R
description: TAMP backup 19 register.
byte_offset: 332
fieldset: BKP19R
- name: BKP20R
description: TAMP backup 20 register.
byte_offset: 336
fieldset: BKP20R
- name: BKP21R
description: TAMP backup 21 register.
byte_offset: 340
fieldset: BKP21R
- name: BKP22R
description: TAMP backup 22 register.
byte_offset: 344
fieldset: BKP22R
- name: BKP23R
description: TAMP backup 23 register.
byte_offset: 348
fieldset: BKP23R
- name: BKP24R
description: TAMP backup 24 register.
byte_offset: 352
fieldset: BKP24R
- name: BKP25R
description: TAMP backup 25 register.
byte_offset: 356
fieldset: BKP25R
- name: BKP26R
description: TAMP backup 26 register.
byte_offset: 360
fieldset: BKP26R
- name: BKP27R
description: TAMP backup 27 register.
byte_offset: 364
fieldset: BKP27R
- name: BKP28R
description: TAMP backup 28 register.
byte_offset: 368
fieldset: BKP28R
- name: BKP29R
description: TAMP backup 29 register.
byte_offset: 372
fieldset: BKP29R
- name: BKP30R
description: TAMP backup 30 register.
byte_offset: 376
fieldset: BKP30R
- name: BKP31R
description: TAMP backup 31 register.
byte_offset: 380
fieldset: BKP31R
fieldset/ATCR1:
description: TAMP active tamper control register 1.
fields:
- name: TAMP1AM
description: Tamper 1 active mode.
bit_offset: 0
bit_size: 1
- name: TAMP2AM
description: Tamper 2 active mode.
bit_offset: 1
bit_size: 1
- name: TAMP3AM
description: Tamper 3 active mode.
bit_offset: 2
bit_size: 1
- name: TAMP4AM
description: Tamper 4 active mode.
bit_offset: 3
bit_size: 1
- name: TAMP5AM
description: Tamper 5 active mode.
bit_offset: 4
bit_size: 1
- name: TAMP6AM
description: Tamper 6 active mode.
bit_offset: 5
bit_size: 1
- name: TAMP7AM
description: Tamper 7 active mode.
bit_offset: 6
bit_size: 1
- name: TAMP8AM
description: Tamper 8 active mode.
bit_offset: 7
bit_size: 1
- name: ATOSEL1
description: Active tamper shared output 1 selection The selected output must be available in the package pinout.
bit_offset: 8
bit_size: 2
- name: ATOSEL2
description: Active tamper shared output 2 selection The selected output must be available in the package pinout.
bit_offset: 10
bit_size: 2
- name: ATOSEL3
description: Active tamper shared output 3 selection The selected output must be available in the package pinout.
bit_offset: 12
bit_size: 2
- name: ATOSEL4
description: Active tamper shared output 4 selection The selected output must be available in the package pinout.
bit_offset: 14
bit_size: 2
- name: ATCKSEL
description: Active tamper RTC asynchronous prescaler clock selection These bits selects the RTC asynchronous prescaler stage output.The selected clock is CK_ATPRE. fCK_ATPRE = fRTCCLK / 2ATCKSEL when (PREDIV_A+1) = 128. ... These bits can be written only when all active tampers are disabled. The write protection remains for up to 1.5 ck_atpre cycles after all the active tampers are disable.
bit_offset: 16
bit_size: 3
- name: ATPER
description: Active tamper output change period The tamper output is changed every CK_ATPER = (2ATPER x CK_ATPRE) cycles. Refer to.
bit_offset: 24
bit_size: 3
- name: ATOSHARE
description: Active tamper output sharing TAMP_IN1 is compared with TAMPOUTSEL1 TAMP_IN2 is compared with TAMPOUTSEL2 TAMP_IN3 is compared with TAMPOUTSEL3 TAMP_IN4 is compared with TAMPOUTSEL4 TAMP_IN5 is compared with TAMPOUTSEL5 TAMP_IN6 is compared with TAMPOUTSEL6 TAMP_IN7 is compared with TAMPOUTSEL7 TAMP_IN8 is compared with TAMPOUTSEL8.
bit_offset: 30
bit_size: 1
- name: FLTEN
description: Active tamper filter enable.
bit_offset: 31
bit_size: 1
fieldset/ATCR2:
description: TAMP active tamper control register 2.
fields:
- name: ATOSEL1
description: Active tamper shared output 1 selection The selected output must be available in the package pinout. Bits 9:8 are the mirror of ATOSEL1[1:0] in the TAMP_ATCR1, and so can also be read or written through TAMP_ATCR1.
bit_offset: 8
bit_size: 3
- name: ATOSEL2
description: Active tamper shared output 2 selection The selected output must be available in the package pinout. Bits 12:11 are the mirror of ATOSEL2[1:0] in the TAMP_ATCR1, and so can also be read or written through TAMP_ATCR1.
bit_offset: 11
bit_size: 3
- name: ATOSEL3
description: Active tamper shared output 3 selection The selected output must be available in the package pinout. Bits 15:14 are the mirror of ATOSEL3[1:0] in the TAMP_ATCR1, and so can also be read or written through TAMP_ATCR1.
bit_offset: 14
bit_size: 3
- name: ATOSEL4
description: Active tamper shared output 4 selection The selected output must be available in the package pinout. Bits 18:17 are the mirror of ATOSEL2[1:0] in the TAMP_ATCR1, and so can also be read or written through TAMP_ATCR1.
bit_offset: 17
bit_size: 3
- name: ATOSEL5
description: Active tamper shared output 5 selection The selected output must be available in the package pinout.
bit_offset: 20
bit_size: 3
- name: ATOSEL6
description: Active tamper shared output 6 selection The selected output must be available in the package pinout.
bit_offset: 23
bit_size: 3
- name: ATOSEL7
description: Active tamper shared output 7 selection The selected output must be available in the package pinout.
bit_offset: 26
bit_size: 3
- name: ATOSEL8
description: Active tamper shared output 8 selection The selected output must be available in the package pinout.
bit_offset: 29
bit_size: 3
fieldset/ATOR:
description: TAMP active tamper output register.
fields:
- name: PRNG
description: Pseudo-random generator value This field provides the values of the PRNG output. Because of potential inconsistencies due to synchronization delays, PRNG must be read at least twice. The read value is correct if it is equal to previous read value. This field can only be read when the APB is in secure mode.
bit_offset: 0
bit_size: 8
- name: SEEDF
description: Seed running flag This flag is set by hardware when a new seed is written in the TAMP_ATSEEDR. It is cleared by hardware when the PRNG has absorbed this new seed, and by system reset. The TAMP APB cock must not be switched off as long as SEEDF is set.
bit_offset: 14
bit_size: 1
- name: INITS
description: Active tamper initialization status This flag is set by hardware when the PRNG has absorbed the first 128-bit seed, meaning that the enabled active tampers are functional. This flag is cleared when the active tampers are disabled.
bit_offset: 15
bit_size: 1
fieldset/ATSEEDR:
description: TAMP active tamper seed register.
fields:
- name: SEED
description: Pseudo-random generator seed value This register must be written four times with 32-bit values to provide the 128-bit seed to the PRNG. Writing to this register automatically sends the seed value to the PRNG.
bit_offset: 0
bit_size: 32
fieldset/BKP0R:
description: TAMP backup 0 register.
fields:
- name: BKP
description: The application can write or read data to and from these registers. In the default (ERASE) configuration this register is reset on a tamper detection event. It is forced to reset value as long as there is at least one internal or external tamper flag being set. This register is also reset when the readout protection (RDP) is disabled.
bit_offset: 0
bit_size: 32
fieldset/BKP10R:
description: TAMP backup 10 register.
fields:
- name: BKP
description: The application can write or read data to and from these registers. In the default (ERASE) configuration this register is reset on a tamper detection event. It is forced to reset value as long as there is at least one internal or external tamper flag being set. This register is also reset when the readout protection (RDP) is disabled.
bit_offset: 0
bit_size: 32
fieldset/BKP11R:
description: TAMP backup 11 register.
fields:
- name: BKP
description: The application can write or read data to and from these registers. In the default (ERASE) configuration this register is reset on a tamper detection event. It is forced to reset value as long as there is at least one internal or external tamper flag being set. This register is also reset when the readout protection (RDP) is disabled.
bit_offset: 0
bit_size: 32
fieldset/BKP12R:
description: TAMP backup 12 register.
fields:
- name: BKP
description: The application can write or read data to and from these registers. In the default (ERASE) configuration this register is reset on a tamper detection event. It is forced to reset value as long as there is at least one internal or external tamper flag being set. This register is also reset when the readout protection (RDP) is disabled.
bit_offset: 0
bit_size: 32
fieldset/BKP13R:
description: TAMP backup 13 register.
fields:
- name: BKP
description: The application can write or read data to and from these registers. In the default (ERASE) configuration this register is reset on a tamper detection event. It is forced to reset value as long as there is at least one internal or external tamper flag being set. This register is also reset when the readout protection (RDP) is disabled.
bit_offset: 0
bit_size: 32
fieldset/BKP14R:
description: TAMP backup 14 register.
fields:
- name: BKP
description: The application can write or read data to and from these registers. In the default (ERASE) configuration this register is reset on a tamper detection event. It is forced to reset value as long as there is at least one internal or external tamper flag being set. This register is also reset when the readout protection (RDP) is disabled.
bit_offset: 0
bit_size: 32
fieldset/BKP15R:
description: TAMP backup 15 register.
fields:
- name: BKP
description: The application can write or read data to and from these registers. In the default (ERASE) configuration this register is reset on a tamper detection event. It is forced to reset value as long as there is at least one internal or external tamper flag being set. This register is also reset when the readout protection (RDP) is disabled.
bit_offset: 0
bit_size: 32
fieldset/BKP16R:
description: TAMP backup 16 register.
fields:
- name: BKP
description: The application can write or read data to and from these registers. In the default (ERASE) configuration this register is reset on a tamper detection event. It is forced to reset value as long as there is at least one internal or external tamper flag being set. This register is also reset when the readout protection (RDP) is disabled.
bit_offset: 0
bit_size: 32
fieldset/BKP17R:
description: TAMP backup 17 register.
fields:
- name: BKP
description: The application can write or read data to and from these registers. In the default (ERASE) configuration this register is reset on a tamper detection event. It is forced to reset value as long as there is at least one internal or external tamper flag being set. This register is also reset when the readout protection (RDP) is disabled.
bit_offset: 0
bit_size: 32
fieldset/BKP18R:
description: TAMP backup 18 register.
fields:
- name: BKP
description: The application can write or read data to and from these registers. In the default (ERASE) configuration this register is reset on a tamper detection event. It is forced to reset value as long as there is at least one internal or external tamper flag being set. This register is also reset when the readout protection (RDP) is disabled.
bit_offset: 0
bit_size: 32
fieldset/BKP19R:
description: TAMP backup 19 register.
fields:
- name: BKP
description: The application can write or read data to and from these registers. In the default (ERASE) configuration this register is reset on a tamper detection event. It is forced to reset value as long as there is at least one internal or external tamper flag being set. This register is also reset when the readout protection (RDP) is disabled.
bit_offset: 0
bit_size: 32
fieldset/BKP1R:
description: TAMP backup 1 register.
fields:
- name: BKP
description: The application can write or read data to and from these registers. In the default (ERASE) configuration this register is reset on a tamper detection event. It is forced to reset value as long as there is at least one internal or external tamper flag being set. This register is also reset when the readout protection (RDP) is disabled.
bit_offset: 0
bit_size: 32
fieldset/BKP20R:
description: TAMP backup 20 register.
fields:
- name: BKP
description: The application can write or read data to and from these registers. In the default (ERASE) configuration this register is reset on a tamper detection event. It is forced to reset value as long as there is at least one internal or external tamper flag being set. This register is also reset when the readout protection (RDP) is disabled.
bit_offset: 0
bit_size: 32
fieldset/BKP21R:
description: TAMP backup 21 register.
fields:
- name: BKP
description: The application can write or read data to and from these registers. In the default (ERASE) configuration this register is reset on a tamper detection event. It is forced to reset value as long as there is at least one internal or external tamper flag being set. This register is also reset when the readout protection (RDP) is disabled.
bit_offset: 0
bit_size: 32
fieldset/BKP22R:
description: TAMP backup 22 register.
fields:
- name: BKP
description: The application can write or read data to and from these registers. In the default (ERASE) configuration this register is reset on a tamper detection event. It is forced to reset value as long as there is at least one internal or external tamper flag being set. This register is also reset when the readout protection (RDP) is disabled.
bit_offset: 0
bit_size: 32
fieldset/BKP23R:
description: TAMP backup 23 register.
fields:
- name: BKP
description: The application can write or read data to and from these registers. In the default (ERASE) configuration this register is reset on a tamper detection event. It is forced to reset value as long as there is at least one internal or external tamper flag being set. This register is also reset when the readout protection (RDP) is disabled.
bit_offset: 0
bit_size: 32
fieldset/BKP24R:
description: TAMP backup 24 register.
fields:
- name: BKP
description: The application can write or read data to and from these registers. In the default (ERASE) configuration this register is reset on a tamper detection event. It is forced to reset value as long as there is at least one internal or external tamper flag being set. This register is also reset when the readout protection (RDP) is disabled.
bit_offset: 0
bit_size: 32
fieldset/BKP25R:
description: TAMP backup 25 register.
fields:
- name: BKP
description: The application can write or read data to and from these registers. In the default (ERASE) configuration this register is reset on a tamper detection event. It is forced to reset value as long as there is at least one internal or external tamper flag being set. This register is also reset when the readout protection (RDP) is disabled.
bit_offset: 0
bit_size: 32
fieldset/BKP26R:
description: TAMP backup 26 register.
fields:
- name: BKP
description: The application can write or read data to and from these registers. In the default (ERASE) configuration this register is reset on a tamper detection event. It is forced to reset value as long as there is at least one internal or external tamper flag being set. This register is also reset when the readout protection (RDP) is disabled.
bit_offset: 0
bit_size: 32
fieldset/BKP27R:
description: TAMP backup 27 register.
fields:
- name: BKP
description: The application can write or read data to and from these registers. In the default (ERASE) configuration this register is reset on a tamper detection event. It is forced to reset value as long as there is at least one internal or external tamper flag being set. This register is also reset when the readout protection (RDP) is disabled.
bit_offset: 0
bit_size: 32
fieldset/BKP28R:
description: TAMP backup 28 register.
fields:
- name: BKP
description: The application can write or read data to and from these registers. In the default (ERASE) configuration this register is reset on a tamper detection event. It is forced to reset value as long as there is at least one internal or external tamper flag being set. This register is also reset when the readout protection (RDP) is disabled.
bit_offset: 0
bit_size: 32
fieldset/BKP29R:
description: TAMP backup 29 register.
fields:
- name: BKP
description: The application can write or read data to and from these registers. In the default (ERASE) configuration this register is reset on a tamper detection event. It is forced to reset value as long as there is at least one internal or external tamper flag being set. This register is also reset when the readout protection (RDP) is disabled.
bit_offset: 0
bit_size: 32
fieldset/BKP2R:
description: TAMP backup 2 register.
fields:
- name: BKP
description: The application can write or read data to and from these registers. In the default (ERASE) configuration this register is reset on a tamper detection event. It is forced to reset value as long as there is at least one internal or external tamper flag being set. This register is also reset when the readout protection (RDP) is disabled.
bit_offset: 0
bit_size: 32
fieldset/BKP30R:
description: TAMP backup 30 register.
fields:
- name: BKP
description: The application can write or read data to and from these registers. In the default (ERASE) configuration this register is reset on a tamper detection event. It is forced to reset value as long as there is at least one internal or external tamper flag being set. This register is also reset when the readout protection (RDP) is disabled.
bit_offset: 0
bit_size: 32
fieldset/BKP31R:
description: TAMP backup 31 register.
fields:
- name: BKP
description: The application can write or read data to and from these registers. In the default (ERASE) configuration this register is reset on a tamper detection event. It is forced to reset value as long as there is at least one internal or external tamper flag being set. This register is also reset when the readout protection (RDP) is disabled.
bit_offset: 0
bit_size: 32
fieldset/BKP3R:
description: TAMP backup 3 register.
fields:
- name: BKP
description: The application can write or read data to and from these registers. In the default (ERASE) configuration this register is reset on a tamper detection event. It is forced to reset value as long as there is at least one internal or external tamper flag being set. This register is also reset when the readout protection (RDP) is disabled.
bit_offset: 0
bit_size: 32
fieldset/BKP4R:
description: TAMP backup 4 register.
fields:
- name: BKP
description: The application can write or read data to and from these registers. In the default (ERASE) configuration this register is reset on a tamper detection event. It is forced to reset value as long as there is at least one internal or external tamper flag being set. This register is also reset when the readout protection (RDP) is disabled.
bit_offset: 0
bit_size: 32
fieldset/BKP5R:
description: TAMP backup 5 register.
fields:
- name: BKP
description: The application can write or read data to and from these registers. In the default (ERASE) configuration this register is reset on a tamper detection event. It is forced to reset value as long as there is at least one internal or external tamper flag being set. This register is also reset when the readout protection (RDP) is disabled.
bit_offset: 0
bit_size: 32
fieldset/BKP6R:
description: TAMP backup 6 register.
fields:
- name: BKP
description: The application can write or read data to and from these registers. In the default (ERASE) configuration this register is reset on a tamper detection event. It is forced to reset value as long as there is at least one internal or external tamper flag being set. This register is also reset when the readout protection (RDP) is disabled.
bit_offset: 0
bit_size: 32
fieldset/BKP7R:
description: TAMP backup 7 register.
fields:
- name: BKP
description: The application can write or read data to and from these registers. In the default (ERASE) configuration this register is reset on a tamper detection event. It is forced to reset value as long as there is at least one internal or external tamper flag being set. This register is also reset when the readout protection (RDP) is disabled.
bit_offset: 0
bit_size: 32
fieldset/BKP8R:
description: TAMP backup 8 register.
fields:
- name: BKP
description: The application can write or read data to and from these registers. In the default (ERASE) configuration this register is reset on a tamper detection event. It is forced to reset value as long as there is at least one internal or external tamper flag being set. This register is also reset when the readout protection (RDP) is disabled.
bit_offset: 0
bit_size: 32
fieldset/BKP9R:
description: TAMP backup 9 register.
fields:
- name: BKP
description: The application can write or read data to and from these registers. In the default (ERASE) configuration this register is reset on a tamper detection event. It is forced to reset value as long as there is at least one internal or external tamper flag being set. This register is also reset when the readout protection (RDP) is disabled.
bit_offset: 0
bit_size: 32
fieldset/COUNT1R:
description: TAMP monotonic counter 1 register.
fields:
- name: COUNT
description: This register is read-only only and is incremented by one when a write access is done to this register. This register cannot roll-over and is frozen when reaching the maximum value.
bit_offset: 0
bit_size: 32
fieldset/CR1:
description: TAMP control register 1.
fields:
- name: TAMP1E
description: Tamper detection on TAMP_IN1 enable.
bit_offset: 0
bit_size: 1
- name: TAMP2E
description: Tamper detection on TAMP_IN2 enable.
bit_offset: 1
bit_size: 1
- name: TAMP3E
description: Tamper detection on TAMP_IN3 enable.
bit_offset: 2
bit_size: 1
- name: TAMP4E
description: Tamper detection on TAMP_IN4 enable.
bit_offset: 3
bit_size: 1
- name: TAMP5E
description: Tamper detection on TAMP_IN5 enable.
bit_offset: 4
bit_size: 1
- name: TAMP6E
description: Tamper detection on TAMP_IN6 enable.
bit_offset: 5
bit_size: 1
- name: TAMP7E
description: Tamper detection on TAMP_IN7 enable.
bit_offset: 6
bit_size: 1
- name: TAMP8E
description: Tamper detection on TAMP_IN8 enable.
bit_offset: 7
bit_size: 1
- name: ITAMP1E
description: Internal tamper 1 enable.
bit_offset: 16
bit_size: 1
- name: ITAMP2E
description: Internal tamper 2 enable.
bit_offset: 17
bit_size: 1
- name: ITAMP3E
description: Internal tamper 3 enable.
bit_offset: 18
bit_size: 1
- name: ITAMP4E
description: Internal tamper 4 enable.
bit_offset: 19
bit_size: 1
- name: ITAMP5E
description: Internal tamper 5 enable.
bit_offset: 20
bit_size: 1
- name: ITAMP6E
description: Internal tamper 6 enable.
bit_offset: 21
bit_size: 1
- name: ITAMP7E
description: Internal tamper 7 enable.
bit_offset: 22
bit_size: 1
- name: ITAMP8E
description: Internal tamper 8 enable.
bit_offset: 23
bit_size: 1
- name: ITAMP9E
description: Internal tamper 9 enable.
bit_offset: 24
bit_size: 1
- name: ITAMP11E
description: Internal tamper 11 enable.
bit_offset: 26
bit_size: 1
- name: ITAMP12E
description: Internal tamper 12 enable.
bit_offset: 27
bit_size: 1
- name: ITAMP13E
description: Internal tamper 13 enable.
bit_offset: 28
bit_size: 1
- name: ITAMP15E
description: Internal tamper 15 enable.
bit_offset: 30
bit_size: 1
fieldset/CR2:
description: TAMP control register 2.
fields:
- name: TAMP1NOER
description: Tamper 1 no erase.
bit_offset: 0
bit_size: 1
- name: TAMP2NOER
description: Tamper 2 no erase.
bit_offset: 1
bit_size: 1
- name: TAMP3NOER
description: Tamper 3 no erase.
bit_offset: 2
bit_size: 1
- name: TAMP4NOER
description: Tamper 4 no erase.
bit_offset: 3
bit_size: 1
- name: TAMP5NOER
description: Tamper 5 no erase.
bit_offset: 4
bit_size: 1
- name: TAMP6NOER
description: Tamper 6 no erase.
bit_offset: 5
bit_size: 1
- name: TAMP7NOER
description: Tamper 7 no erase.
bit_offset: 6
bit_size: 1
- name: TAMP8NOER
description: Tamper 8 no erase.
bit_offset: 7
bit_size: 1
- name: TAMP1MSK
description: Tamper 1 mask The tamper 1 interrupt must not be enabled when TAMP1MSK is set.
bit_offset: 16
bit_size: 1
- name: TAMP2MSK
description: Tamper 2 mask The tamper 2 interrupt must not be enabled when TAMP2MSK is set.
bit_offset: 17
bit_size: 1
- name: TAMP3MSK
description: Tamper 3 mask The tamper 3 interrupt must not be enabled when TAMP3MSK is set.
bit_offset: 18
bit_size: 1
- name: BKBLOCK
description: Backup registers and device secrets access blocked.
bit_offset: 22
bit_size: 1
- name: BKERASE
description: Backup registers and device secrets erase Writing 1 to this bit reset the backup registers and device secrets(1). Writing 0 has no effect. This bit is always read as 0.
bit_offset: 23
bit_size: 1
- name: TAMP1TRG
description: Active level for tamper 1 input If TAMPFLT = 00 Tamper 1 input rising edge triggers a tamper detection event. If TAMPFLT = 00 Tamper 1 input falling edge triggers a tamper detection event.
bit_offset: 24
bit_size: 1
- name: TAMP2TRG
description: Active level for tamper 2 input If TAMPFLT = 00 Tamper 2 input rising edge triggers a tamper detection event. If TAMPFLT = 00 Tamper 2 input falling edge triggers a tamper detection event.
bit_offset: 25
bit_size: 1
- name: TAMP3TRG
description: Active level for tamper 3 input If TAMPFLT = 00 Tamper 3 input rising edge triggers a tamper detection event. If TAMPFLT = 00 Tamper 3 input falling edge triggers a tamper detection event.
bit_offset: 26
bit_size: 1
- name: TAMP4TRG
description: Active level for tamper 4 input (active mode disabled) If TAMPFLT = 00 Tamper 4 input rising edge triggers a tamper detection event. If TAMPFLT = 00 Tamper 4 input falling edge triggers a tamper detection event.
bit_offset: 27
bit_size: 1
- name: TAMP5TRG
description: Active level for tamper 5 input (active mode disabled) If TAMPFLT = 00 Tamper 5 input rising edge triggers a tamper detection event. If TAMPFLT = 00 Tamper 5 input falling edge triggers a tamper detection event.
bit_offset: 28
bit_size: 1
- name: TAMP6TRG
description: Active level for tamper 6 input (active mode disabled) If TAMPFLT = 00 Tamper 6 input rising edge triggers a tamper detection event. If TAMPFLT = 00 Tamper 6 input falling edge triggers a tamper detection event.
bit_offset: 29
bit_size: 1
- name: TAMP7TRG
description: Active level for tamper 7 input (active mode disabled) If TAMPFLT = 00 Tamper 7 input rising edge triggers a tamper detection event. If TAMPFLT = 00 Tamper 7 input falling edge triggers a tamper detection event.
bit_offset: 30
bit_size: 1
- name: TAMP8TRG
description: Active level for tamper 8 input (active mode disabled) If TAMPFLT = 00 Tamper 8 input rising edge triggers a tamper detection event. If TAMPFLT = 00 Tamper 8 input falling edge triggers a tamper detection event.
bit_offset: 31
bit_size: 1
fieldset/CR3:
description: TAMP control register 3.
fields:
- name: ITAMP1NOER
description: Internal Tamper 1 no erase.
bit_offset: 0
bit_size: 1
- name: ITAMP2NOER
description: Internal Tamper 2 no erase.
bit_offset: 1
bit_size: 1
- name: ITAMP3NOER
description: Internal Tamper 3 no erase.
bit_offset: 2
bit_size: 1
- name: ITAMP4NOER
description: Internal Tamper 4 no erase.
bit_offset: 3
bit_size: 1
- name: ITAMP5NOER
description: Internal Tamper 5 no erase.
bit_offset: 4
bit_size: 1
- name: ITAMP6NOER
description: Internal Tamper 6 no erase.
bit_offset: 5
bit_size: 1
- name: ITAMP7NOER
description: Internal Tamper 7 no erase.
bit_offset: 6
bit_size: 1
- name: ITAMP8NOER
description: Internal Tamper 8 no erase.
bit_offset: 7
bit_size: 1
- name: ITAMP9NOER
description: Internal Tamper 9 no erase.
bit_offset: 8
bit_size: 1
- name: ITAMP11NOER
description: Internal Tamper 11 no erase.
bit_offset: 10
bit_size: 1
- name: ITAMP12NOER
description: Internal Tamper 12 no erase.
bit_offset: 11
bit_size: 1
- name: ITAMP13NOER
description: Internal Tamper 13 no erase.
bit_offset: 12
bit_size: 1
- name: ITAMP15NOER
description: Internal Tamper 15 no erase.
bit_offset: 14
bit_size: 1
fieldset/ERCFGR:
description: TAMP erase configuration register.
fields:
- name: ERCFG0
description: Configurable device secrets configuration.
bit_offset: 0
bit_size: 1
fieldset/FLTCR:
description: TAMP filter control register.
fields:
- name: TAMPFREQ
description: Tamper sampling frequency Determines the frequency at which each of the TAMP_INx inputs are sampled.
bit_offset: 0
bit_size: 3
- name: TAMPFLT
description: TAMP_INx filter count These bits determines the number of consecutive samples at the specified level (TAMP*TRG) needed to activate a tamper event. TAMPFLT is valid for each of the TAMP_INx inputs.
bit_offset: 3
bit_size: 2
- name: TAMPPRCH
description: TAMP_INx precharge duration These bit determines the duration of time during which the pull-up/is activated before each sample. TAMPPRCH is valid for each of the TAMP_INx inputs.
bit_offset: 5
bit_size: 2
- name: TAMPPUDIS
description: TAMP_INx pull-up disable This bit determines if each of the TAMPx pins are precharged before each sample.
bit_offset: 7
bit_size: 1
fieldset/IER:
description: TAMP interrupt enable register.
fields:
- name: TAMP1IE
description: Tamper 1 interrupt enable.
bit_offset: 0
bit_size: 1
- name: TAMP2IE
description: Tamper 2 interrupt enable.
bit_offset: 1
bit_size: 1
- name: TAMP3IE
description: Tamper 3 interrupt enable.
bit_offset: 2
bit_size: 1
- name: TAMP4IE
description: Tamper 4 interrupt enable.
bit_offset: 3
bit_size: 1
- name: TAMP5IE
description: Tamper 5 interrupt enable.
bit_offset: 4
bit_size: 1
- name: TAMP6IE
description: Tamper 6 interrupt enable.
bit_offset: 5
bit_size: 1
- name: TAMP7IE
description: Tamper 7interrupt enable.
bit_offset: 6
bit_size: 1
- name: TAMP8IE
description: Tamper 8 interrupt enable.
bit_offset: 7
bit_size: 1
- name: ITAMP1IE
description: Internal tamper 1 interrupt enable.
bit_offset: 16
bit_size: 1
- name: ITAMP2IE
description: Internal tamper 2 interrupt enable.
bit_offset: 17
bit_size: 1
- name: ITAMP3IE
description: Internal tamper 3 interrupt enable.
bit_offset: 18
bit_size: 1
- name: ITAMP4IE
description: Internal tamper 4 interrupt enable.
bit_offset: 19
bit_size: 1
- name: ITAMP5IE
description: Internal tamper 5 interrupt enable.
bit_offset: 20
bit_size: 1
- name: ITAMP6IE
description: Internal tamper 6 interrupt enable.
bit_offset: 21
bit_size: 1
- name: ITAMP7IE
description: Internal tamper 7 interrupt enable.
bit_offset: 22
bit_size: 1
- name: ITAMP8IE
description: Internal tamper 8 interrupt enable.
bit_offset: 23
bit_size: 1
- name: ITAMP9IE
description: Internal tamper 9 interrupt enable.
bit_offset: 24
bit_size: 1
- name: ITAMP11IE
description: Internal tamper 11 interrupt enable.
bit_offset: 26
bit_size: 1
- name: ITAMP12IE
description: Internal tamper 12 interrupt enable.
bit_offset: 27
bit_size: 1
- name: ITAMP13IE
description: Internal tamper 13 interrupt enable.
bit_offset: 28
bit_size: 1
- name: ITAMP15IE
description: Internal tamper 15 interrupt enable.
bit_offset: 30
bit_size: 1
fieldset/MISR:
description: TAMP non-secure masked interrupt status register.
fields:
- name: TAMP1MF
description: TAMP1 non-secure interrupt masked flag This flag is set by hardware when the tamper 1 non-secure interrupt is raised.
bit_offset: 0
bit_size: 1
- name: TAMP2MF
description: TAMP2 non-secure interrupt masked flag This flag is set by hardware when the tamper 2 non-secure interrupt is raised.
bit_offset: 1
bit_size: 1
- name: TAMP3MF
description: TAMP3 non-secure interrupt masked flag This flag is set by hardware when the tamper 3 non-secure interrupt is raised.
bit_offset: 2
bit_size: 1
- name: TAMP4MF
description: TAMP4 non-secure interrupt masked flag This flag is set by hardware when the tamper 4 non-secure interrupt is raised.
bit_offset: 3
bit_size: 1
- name: TAMP5MF
description: TAMP5 non-secure interrupt masked flag This flag is set by hardware when the tamper 5 non-secure interrupt is raised.
bit_offset: 4
bit_size: 1
- name: TAMP6MF
description: TAMP6 non-secure interrupt masked flag This flag is set by hardware when the tamper 6 non-secure interrupt is raised.
bit_offset: 5
bit_size: 1
- name: TAMP7MF
description: TAMP7 non-secure interrupt masked flag This flag is set by hardware when the tamper 7 non-secure interrupt is raised.
bit_offset: 6
bit_size: 1
- name: TAMP8MF
description: TAMP8 non-secure interrupt masked flag This flag is set by hardware when the tamper 8 non-secure interrupt is raised.
bit_offset: 7
bit_size: 1
- name: ITAMP1MF
description: Internal tamper 1 non-secure interrupt masked flag This flag is set by hardware when the internal tamper 1 non-secure interrupt is raised.
bit_offset: 16
bit_size: 1
- name: ITAMP2MF
description: Internal tamper 2 non-secure interrupt masked flag This flag is set by hardware when the internal tamper 2 non-secure interrupt is raised.
bit_offset: 17
bit_size: 1
- name: ITAMP3MF
description: Internal tamper 3 non-secure interrupt masked flag This flag is set by hardware when the internal tamper 3 non-secure interrupt is raised.
bit_offset: 18
bit_size: 1
- name: ITAMP4MF
description: Internal tamper 4 non-secure interrupt masked flag This flag is set by hardware when the internal tamper 4 non-secure interrupt is raised.
bit_offset: 19
bit_size: 1
- name: ITAMP5MF
description: Internal tamper 5 non-secure interrupt masked flag This flag is set by hardware when the internal tamper 5 non-secure interrupt is raised.
bit_offset: 20
bit_size: 1
- name: ITAMP6MF
description: Internal tamper 6 non-secure interrupt masked flag This flag is set by hardware when the internal tamper 6 non-secure interrupt is raised.
bit_offset: 21
bit_size: 1
- name: ITAMP7MF
description: Internal tamper 7 tamper non-secure interrupt masked flag This flag is set by hardware when the internal tamper 7 non-secure interrupt is raised.
bit_offset: 22
bit_size: 1
- name: ITAMP8MF
description: Internal tamper 8 non-secure interrupt masked flag This flag is set by hardware when the internal tamper 8 non-secure interrupt is raised.
bit_offset: 23
bit_size: 1
- name: ITAMP9MF
description: internal tamper 9 non-secure interrupt masked flag This flag is set by hardware when the internal tamper 9 non-secure interrupt is raised.
bit_offset: 24
bit_size: 1
- name: ITAMP11MF
description: internal tamper 11 non-secure interrupt masked flag This flag is set by hardware when the internal tamper 11 non-secure interrupt is raised.
bit_offset: 26
bit_size: 1
- name: ITAMP12MF
description: internal tamper 12 non-secure interrupt masked flag This flag is set by hardware when the internal tamper 12 non-secure interrupt is raised.
bit_offset: 27
bit_size: 1
- name: ITAMP13MF
description: internal tamper 13 non-secure interrupt masked flag This flag is set by hardware when the internal tamper 13 non-secure interrupt is raised.
bit_offset: 28
bit_size: 1
- name: ITAMP15MF
description: internal tamper 15 non-secure interrupt masked flag This flag is set by hardware when the internal tamper 15 non-secure interrupt is raised.
bit_offset: 30
bit_size: 1
fieldset/OR:
description: TAMP option register.
fields:
- name: OUT3_RMP
description: TAMP_OUT3 mapping.
bit_offset: 1
bit_size: 2
- name: OUT5_RMP
description: TAMP_OUT5 mapping.
bit_offset: 3
bit_size: 1
- name: IN2_RMP
description: TAMP_IN2 mapping.
bit_offset: 8
bit_size: 1
- name: IN3_RMP
description: TAMP_IN3 mapping.
bit_offset: 9
bit_size: 1
- name: IN4_RMP
description: TAMP_IN4 mapping.
bit_offset: 10
bit_size: 1
fieldset/PRIVCFGR:
description: TAMP privilege mode control register.
fields:
- name: CNT1PRIV
description: Monotonic counter 1 privilege protection.
bit_offset: 15
bit_size: 1
- name: BKPRWPRIV
description: Backup registers zone 1 privilege protection.
bit_offset: 29
bit_size: 1
- name: BKPWPRIV
description: Backup registers zone 2 privilege protection.
bit_offset: 30
bit_size: 1
- name: TAMPPRIV
description: 'Tamper privilege protection (excluding backup registers) Note: Refer to for details on the read protection.'
bit_offset: 31
bit_size: 1
fieldset/SCR:
description: TAMP status clear register.
fields:
- name: CTAMP1F
description: Clear TAMP1 detection flag Writing 1 in this bit clears the TAMP1F bit in the TAMP_SR register.
bit_offset: 0
bit_size: 1
- name: CTAMP2F
description: Clear TAMP2 detection flag Writing 1 in this bit clears the TAMP2F bit in the TAMP_SR register.
bit_offset: 1
bit_size: 1
- name: CTAMP3F
description: Clear TAMP3 detection flag Writing 1 in this bit clears the TAMP3F bit in the TAMP_SR register.
bit_offset: 2
bit_size: 1
- name: CTAMP4F
description: Clear TAMP4 detection flag Writing 1 in this bit clears the TAMP4F bit in the TAMP_SR register.
bit_offset: 3
bit_size: 1
- name: CTAMP5F
description: Clear TAMP5 detection flag Writing 1 in this bit clears the TAMP5F bit in the TAMP_SR register.
bit_offset: 4
bit_size: 1
- name: CTAMP6F
description: Clear TAMP6 detection flag Writing 1 in this bit clears the TAMP6F bit in the TAMP_SR register.
bit_offset: 5
bit_size: 1
- name: CTAMP7F
description: Clear TAMP7 detection flag Writing 1 in this bit clears the TAMP7F bit in the TAMP_SR register.
bit_offset: 6
bit_size: 1
- name: CTAMP8F
description: Clear TAMP8 detection flag Writing 1 in this bit clears the TAMP8F bit in the TAMP_SR register.
bit_offset: 7
bit_size: 1
- name: CITAMP1F
description: Clear ITAMP1 detection flag Writing 1 in this bit clears the ITAMP1F bit in the TAMP_SR register.
bit_offset: 16
bit_size: 1
- name: CITAMP2F
description: Clear ITAMP2 detection flag Writing 1 in this bit clears the ITAMP2F bit in the TAMP_SR register.
bit_offset: 17
bit_size: 1
- name: CITAMP3F
description: Clear ITAMP3 detection flag Writing 1 in this bit clears the ITAMP3F bit in the TAMP_SR register.
bit_offset: 18
bit_size: 1
- name: CITAMP4F
description: Clear ITAMP4 detection flag Writing 1 in this bit clears the ITAMP4F bit in the TAMP_SR register.
bit_offset: 19
bit_size: 1
- name: CITAMP5F
description: Clear ITAMP5 detection flag Writing 1 in this bit clears the ITAMP5F bit in the TAMP_SR register.
bit_offset: 20
bit_size: 1
- name: CITAMP6F
description: Clear ITAMP6 detection flag Writing 1 in this bit clears the ITAMP6F bit in the TAMP_SR register.
bit_offset: 21
bit_size: 1
- name: CITAMP7F
description: Clear ITAMP7 detection flag Writing 1 in this bit clears the ITAMP7F bit in the TAMP_SR register.
bit_offset: 22
bit_size: 1
- name: CITAMP8F
description: Clear ITAMP8 detection flag Writing 1 in this bit clears the ITAMP8F bit in the TAMP_SR register.
bit_offset: 23
bit_size: 1
- name: CITAMP9F
description: Clear ITAMP9 detection flag Writing 1 in this bit clears the ITAMP9F bit in the TAMP_SR register.
bit_offset: 24
bit_size: 1
- name: CITAMP11F
description: Clear ITAMP11 detection flag Writing 1 in this bit clears the ITAMP11F bit in the TAMP_SR register.
bit_offset: 26
bit_size: 1
- name: CITAMP12F
description: Clear ITAMP12 detection flag Writing 1 in this bit clears the ITAMP12F bit in the TAMP_SR register.
bit_offset: 27
bit_size: 1
- name: CITAMP13F
description: Clear ITAMP13 detection flag Writing 1 in this bit clears the ITAMP13F bit in the TAMP_SR register.
bit_offset: 28
bit_size: 1
- name: CITAMP15F
description: Clear ITAMP15 detection flag Writing 1 in this bit clears the ITAMP15F bit in the TAMP_SR register.
bit_offset: 30
bit_size: 1
fieldset/SECCFGR:
description: TAMP secure mode register.
fields:
- name: BKPRWSEC
description: 'Backup registers read/write protection offset Protection zone 1 is defined for backup registers from TAMP_BKP0R to TAMP_BKPxR (x = BKPRWSEC-1, from 0 to 128). if TZEN=1, these backup registers can be read and written only with secure access. If TZEN=0: the protection zone 1 can be read and written with non-secure access. If BKPRWSEC = 0: there is no protection zone 1. If BKPRWPRIV is set, BKPRWSEC[7:0] can be written only in privileged mode.'
bit_offset: 0
bit_size: 8
- name: CNT1SEC
description: Monotonic counter 1 secure protection.
bit_offset: 15
bit_size: 1
- name: BKPWSEC
description: 'Backup registers write protection offset Protection zone 2 is defined for backup registers from TAMP_BKPyR (y = BKPRWSEC, from 0 to 128) to TAMP_BKPzR (z = BKPWSEC-1, from 0 to 128, BKPWSEC ≥ BKPRWSEC): if TZEN=1, these backup registers can be written only with secure access. They can be read with secure or non-secure access. Protection zone 3 defined for backup registers from TAMP_BKPtR (t = BKPWSEC, from 0 to 127). They can be read or written with secure or non-secure access. If TZEN=0: the protection zone 2 can be read and written with non-secure access. If BKPWSEC = 0 or if BKPWSEC ≤ BKPRWSEC: there is no protection zone 2. If BKPWPRIV is set, BKPRWSEC[7:0] can be written only in privileged mode.'
bit_offset: 16
bit_size: 8
- name: BHKLOCK
description: Boot hardware key lock This bit can be read and can only be written to 1 by software. It is cleared by hardware together with the backup registers following a tamper detection event or when the readout protection (RDP) is disabled.
bit_offset: 30
bit_size: 1
- name: TAMPSEC
description: 'Tamper protection (excluding monotonic counters and backup registers) Note: Refer to for details on the read protection.'
bit_offset: 31
bit_size: 1
fieldset/SMISR:
description: TAMP secure masked interrupt status register.
fields:
- name: TAMP1MF
description: TAMP1 secure interrupt masked flag This flag is set by hardware when the tamper 1 secure interrupt is raised.
bit_offset: 0
bit_size: 1
- name: TAMP2MF
description: TAMP2 secure interrupt masked flag This flag is set by hardware when the tamper 2 secure interrupt is raised.
bit_offset: 1
bit_size: 1
- name: TAMP3MF
description: TAMP3 secure interrupt masked flag This flag is set by hardware when the tamper 3 secure interrupt is raised.
bit_offset: 2
bit_size: 1
- name: TAMP4MF
description: TAMP4 secure interrupt masked flag This flag is set by hardware when the tamper 4 secure interrupt is raised.
bit_offset: 3
bit_size: 1
- name: TAMP5MF
description: TAMP5 secure interrupt masked flag This flag is set by hardware when the tamper 5 secure interrupt is raised.
bit_offset: 4
bit_size: 1
- name: TAMP6MF
description: TAMP6 secure interrupt masked flag This flag is set by hardware when the tamper 6 secure interrupt is raised.
bit_offset: 5
bit_size: 1
- name: TAMP7MF
description: TAMP7 secure interrupt masked flag This flag is set by hardware when the tamper 7 secure interrupt is raised.
bit_offset: 6
bit_size: 1
- name: TAMP8MF
description: TAMP8 secure interrupt masked flag This flag is set by hardware when the tamper 8 secure interrupt is raised.
bit_offset: 7
bit_size: 1
- name: ITAMP1MF
description: Internal tamper 1 secure interrupt masked flag This flag is set by hardware when the internal tamper 1 secure interrupt is raised.
bit_offset: 16
bit_size: 1
- name: ITAMP2MF
description: Internal tamper 2 secure interrupt masked flag This flag is set by hardware when the internal tamper 2 secure interrupt is raised.
bit_offset: 17
bit_size: 1
- name: ITAMP3MF
description: Internal tamper 3 secure interrupt masked flag This flag is set by hardware when the internal tamper 3 secure interrupt is raised.
bit_offset: 18
bit_size: 1
- name: ITAMP4MF
description: Internal tamper 4 secure interrupt masked flag This flag is set by hardware when the internal tamper 4 secure interrupt is raised.
bit_offset: 19
bit_size: 1
- name: ITAMP5MF
description: Internal tamper 5 secure interrupt masked flag This flag is set by hardware when the internal tamper 5 secure interrupt is raised.
bit_offset: 20
bit_size: 1
- name: ITAMP6MF
description: Internal tamper 6 secure interrupt masked flag This flag is set by hardware when the internal tamper 6 secure interrupt is raised.
bit_offset: 21
bit_size: 1
- name: ITAMP7MF
description: Internal tamper 7 secure interrupt masked flag This flag is set by hardware when the internal tamper 7 secure interrupt is raised.
bit_offset: 22
bit_size: 1
- name: ITAMP8MF
description: Internal tamper 8 secure interrupt masked flag This flag is set by hardware when the internal tamper 8 secure interrupt is raised.
bit_offset: 23
bit_size: 1
- name: ITAMP9MF
description: internal tamper 9 secure interrupt masked flag This flag is set by hardware when the internal tamper 9 secure interrupt is raised.
bit_offset: 24
bit_size: 1
- name: ITAMP11MF
description: internal tamper 11 secure interrupt masked flag This flag is set by hardware when the internal tamper 11 secure interrupt is raised.
bit_offset: 26
bit_size: 1
- name: ITAMP12MF
description: internal tamper 12 secure interrupt masked flag This flag is set by hardware when the internal tamper 12 secure interrupt is raised.
bit_offset: 27
bit_size: 1
- name: ITAMP13MF
description: internal tamper 13 secure interrupt masked flag This flag is set by hardware when the internal tamper 13 secure interrupt is raised.
bit_offset: 28
bit_size: 1
- name: ITAMP15MF
description: internal tamper 15 secure interrupt masked flag This flag is set by hardware when the internal tamper 15 secure interrupt is raised.
bit_offset: 30
bit_size: 1
fieldset/SR:
description: TAMP status register.
fields:
- name: TAMP1F
description: TAMP1 detection flag This flag is set by hardware when a tamper detection event is detected on the TAMP1 input.
bit_offset: 0
bit_size: 1
- name: TAMP2F
description: TAMP2 detection flag This flag is set by hardware when a tamper detection event is detected on the TAMP2 input.
bit_offset: 1
bit_size: 1
- name: TAMP3F
description: TAMP3 detection flag This flag is set by hardware when a tamper detection event is detected on the TAMP3 input.
bit_offset: 2
bit_size: 1
- name: TAMP4F
description: TAMP4 detection flag This flag is set by hardware when a tamper detection event is detected on the TAMP4 input.
bit_offset: 3
bit_size: 1
- name: TAMP5F
description: TAMP5 detection flag This flag is set by hardware when a tamper detection event is detected on the TAMP5 input.
bit_offset: 4
bit_size: 1
- name: TAMP6F
description: TAMP6 detection flag This flag is set by hardware when a tamper detection event is detected on the TAMP6 input.
bit_offset: 5
bit_size: 1
- name: TAMP7F
description: TAMP7 detection flag This flag is set by hardware when a tamper detection event is detected on the TAMP7 input.
bit_offset: 6
bit_size: 1
- name: TAMP8F
description: TAMP8 detection flag This flag is set by hardware when a tamper detection event is detected on the TAMP8 input.
bit_offset: 7
bit_size: 1
- name: ITAMP1F
description: Internal tamper 1 flag This flag is set by hardware when a tamper detection event is detected on the internal tamper 1.
bit_offset: 16
bit_size: 1
- name: ITAMP2F
description: Internal tamper 2 flag This flag is set by hardware when a tamper detection event is detected on the internal tamper 2.
bit_offset: 17
bit_size: 1
- name: ITAMP3F
description: Internal tamper 3 flag This flag is set by hardware when a tamper detection event is detected on the internal tamper 3.
bit_offset: 18
bit_size: 1
- name: ITAMP4F
description: Internal tamper 4 flag This flag is set by hardware when a tamper detection event is detected on the internal tamper 4.
bit_offset: 19
bit_size: 1
- name: ITAMP5F
description: Internal tamper 5 flag This flag is set by hardware when a tamper detection event is detected on the internal tamper 5.
bit_offset: 20
bit_size: 1
- name: ITAMP6F
description: Internal tamper 6 flag This flag is set by hardware when a tamper detection event is detected on the internal tamper 6.
bit_offset: 21
bit_size: 1
- name: ITAMP7F
description: Internal tamper 7 flag This flag is set by hardware when a tamper detection event is detected on the internal tamper 7.
bit_offset: 22
bit_size: 1
- name: ITAMP8F
description: Internal tamper 8 flag This flag is set by hardware when a tamper detection event is detected on the internal tamper 8.
bit_offset: 23
bit_size: 1
- name: ITAMP9F
description: Internal tamper 9 flag This flag is set by hardware when a tamper detection event is detected on the internal tamper 9.
bit_offset: 24
bit_size: 1
- name: ITAMP11F
description: Internal tamper 11 flag This flag is set by hardware when a tamper detection event is detected on the internal tamper 11.
bit_offset: 26
bit_size: 1
- name: ITAMP12F
description: Internal tamper 12 flag This flag is set by hardware when a tamper detection event is detected on the internal tamper 12.
bit_offset: 27
bit_size: 1
- name: ITAMP13F
description: Internal tamper 13 flag This flag is set by hardware when a tamper detection event is detected on the internal tamper 13.
bit_offset: 28
bit_size: 1
- name: ITAMP15F
description: Internal tamper 15 flag This flag is set by hardware when a tamper detection event is detected on the internal tamper 15.
bit_offset: 30
bit_size: 1