block/TAMP:
  description: Tamper and backup registers
  items:
    - name: CR1
      description: control register 1
      byte_offset: 0
      fieldset: CR1
    - name: CR2
      description: control register 2
      byte_offset: 4
      fieldset: CR2
    - name: FLTCR
      description: TAMP filter control register
      byte_offset: 12
      fieldset: FLTCR
    - name: IER
      description: TAMP interrupt enable register
      byte_offset: 44
      fieldset: IER
    - name: SR
      description: TAMP status register
      byte_offset: 48
      access: Read
      fieldset: SR
    - name: MISR
      description: TAMP masked interrupt status register
      byte_offset: 52
      access: Read
      fieldset: MISR
    - name: SCR
      description: TAMP status clear register
      byte_offset: 60
      fieldset: SCR
    - name: BKPR
      description: TAMP backup register
      array:
        len: 32
        stride: 4
      byte_offset: 256
      fieldset: BKPR
fieldset/BKPR:
  description: TAMP backup register
  fields:
    - name: BKP
      description: BKP
      bit_offset: 0
      bit_size: 32
fieldset/CR1:
  description: control register 1
  fields:
    - name: TAMPE
      description: Tamper detection on IN X enable
      bit_offset: 0
      bit_size: 1
      array:
        len: 3
        stride: 1
    - name: ITAMPE
      description: Internal tamper X enable
      bit_offset: 16
      bit_size: 1
      array:
        len: 6
        stride: 1
fieldset/CR2:
  description: control register 2
  fields:
    - name: TAMPNOER
      description: Tamper X no erase
      bit_offset: 0
      bit_size: 1
      array:
        len: 3
        stride: 1
    - name: TAMPMSK
      description: Tamper X mask.
      bit_offset: 16
      bit_size: 1
      array:
        len: 3
        stride: 1
    - name: TAMPTRG
      description: Active level for tamper X input.
      bit_offset: 24
      bit_size: 1
      array:
        len: 3
        stride: 1
fieldset/FLTCR:
  description: TAMP filter control register
  fields:
    - name: TAMPFREQ
      description: "Tamper sampling frequency. Determines the frequency at which each of the INx inputs are sampled."
      bit_offset: 0
      bit_size: 3
    - name: TAMPFLT
      description: "INx filter count. These bits determines the number of consecutive samples at the specified level (TAMP*TRG) needed to activate a tamper event. TAMPFLT is valid for each of the INx inputs."
      bit_offset: 3
      bit_size: 2
    - name: TAMPPRCH
      description: "INx precharge duration. These bit determines the duration of time during which the pull-up/is activated before each sample. TAMPPRCH is valid for each of the INx inputs."
      bit_offset: 5
      bit_size: 2
    - name: TAMPPUDIS
      description: "INx pull-up disable. This bit determines if each of the TAMPx pins are precharged before each sample."
      bit_offset: 7
      bit_size: 1
fieldset/IER:
  description: TAMP interrupt enable register
  fields:
    - name: TAMPIE
      description: Tamper X interrupt enable
      bit_offset: 0
      bit_size: 1
      array:
        len: 3
        stride: 1
    - name: ITAMPIE
      description: Internal tamper X interrupt enable
      bit_offset: 16
      bit_size: 1
      array:
        len: 6
        stride: 1
fieldset/MISR:
  description: TAMP masked interrupt status register
  fields:
    - name: TAMPMF
      description: Tamper X interrupt masked flag
      bit_offset: 0
      bit_size: 1
      array:
        len: 3
        stride: 1
    - name: ITAMPMF
      description: Internal tamper X interrupt masked flag
      bit_offset: 16
      bit_size: 1
      array:
        len: 6
        stride: 1
fieldset/SCR:
  description: TAMP status clear register
  fields:
    - name: CTAMPF
      description: Clear tamper X detection flag
      bit_offset: 0
      bit_size: 1
      array:
        len: 3
        stride: 1
    - name: CITAMPF
      description: Clear internal tamper X detection flag
      bit_offset: 16
      bit_size: 1
      array:
        len: 6
        stride: 1
fieldset/SR:
  description: TAMP status register
  fields:
    - name: TAMPF
      description: Tamper X detection flag
      bit_offset: 0
      bit_size: 1
      array:
        len: 3
        stride: 1
    - name: ITAMPF
      description: Internal tamper X detection flag
      bit_offset: 16
      bit_size: 1
      array:
        len: 6
        stride: 1