Fix control characters

data/registers/rtc_v2-l4.yaml

@@ -15,7 +15,7 @@ block/RTC:
       byte_offset: 8
       fieldset: CR
     - name: ISR
-      description: "initialization and status\r register"
+      description: "initialization and status register"
       byte_offset: 12
       fieldset: ISR
     - name: PRER
@@ -135,7 +135,7 @@ fieldset/ALRMAR:
       bit_offset: 23
       bit_size: 1
     - name: DU
-      description: "Date units or day in BCD\r format"
+      description: "Date units or day in BCD format"
       bit_offset: 24
       bit_size: 4
     - name: DT
@@ -158,7 +158,7 @@ fieldset/ALRMASSR:
       bit_offset: 0
       bit_size: 15
     - name: MASKSS
-      description: "Mask the most-significant bits starting\r at this bit"
+      description: "Mask the most-significant bits starting at this bit"
       bit_offset: 24
       bit_size: 4
 fieldset/ALRMBR:
@@ -205,7 +205,7 @@ fieldset/ALRMBR:
       bit_offset: 23
       bit_size: 1
     - name: DU
-      description: "Date units or day in BCD\r format"
+      description: "Date units or day in BCD format"
       bit_offset: 24
       bit_size: 4
     - name: DT
@@ -228,7 +228,7 @@ fieldset/ALRMBSSR:
       bit_offset: 0
       bit_size: 15
     - name: MASKSS
-      description: "Mask the most-significant bits starting\r at this bit"
+      description: "Mask the most-significant bits starting at this bit"
       bit_offset: 24
       bit_size: 4
 fieldset/BKPR:
@@ -246,15 +246,15 @@ fieldset/CALR:
       bit_offset: 0
       bit_size: 9
     - name: CALW16
-      description: "Use a 16-second calibration cycle\r period"
+      description: "Use a 16-second calibration cycle period"
       bit_offset: 13
       bit_size: 1
     - name: CALW8
-      description: "Use an 8-second calibration cycle\r period"
+      description: "Use an 8-second calibration cycle period"
       bit_offset: 14
       bit_size: 1
     - name: CALP
-      description: "Increase frequency of RTC by 488.5\r ppm"
+      description: "Increase frequency of RTC by 488.5 ppm"
       bit_offset: 15
       bit_size: 1
 fieldset/CR:
@@ -265,15 +265,15 @@ fieldset/CR:
       bit_offset: 0
       bit_size: 3
     - name: TSEDGE
-      description: "Time-stamp event active\r edge"
+      description: "Time-stamp event active edge"
       bit_offset: 3
       bit_size: 1
     - name: REFCKON
-      description: "Reference clock detection enable (50 or\r 60 Hz)"
+      description: "Reference clock detection enable (50 or 60 Hz)"
       bit_offset: 4
       bit_size: 1
     - name: BYPSHAD
-      description: "Bypass the shadow\r registers"
+      description: "Bypass the shadow registers"
       bit_offset: 5
       bit_size: 1
     - name: FMT
@@ -305,19 +305,19 @@ fieldset/CR:
       bit_offset: 13
       bit_size: 1
     - name: WUTIE
-      description: "Wakeup timer interrupt\r enable"
+      description: "Wakeup timer interrupt enable"
       bit_offset: 14
       bit_size: 1
     - name: TSIE
-      description: "Time-stamp interrupt\r enable"
+      description: "Time-stamp interrupt enable"
       bit_offset: 15
       bit_size: 1
     - name: ADD1H
-      description: "Add 1 hour (summer time\r change)"
+      description: "Add 1 hour (summer time change)"
       bit_offset: 16
       bit_size: 1
     - name: SUB1H
-      description: "Subtract 1 hour (winter time\r change)"
+      description: "Subtract 1 hour (winter time change)"
       bit_offset: 17
       bit_size: 1
     - name: BKP
@@ -325,7 +325,7 @@ fieldset/CR:
       bit_offset: 18
       bit_size: 1
     - name: COSEL
-      description: "Calibration output\r selection"
+      description: "Calibration output selection"
       bit_offset: 19
       bit_size: 1
     - name: POL
@@ -341,7 +341,7 @@ fieldset/CR:
       bit_offset: 23
       bit_size: 1
     - name: ITSE
-      description: "timestamp on internal event\r enable"
+      description: "timestamp on internal event enable"
       bit_offset: 24
       bit_size: 1
 fieldset/DR:
@@ -376,7 +376,7 @@ fieldset/DR:
       bit_offset: 20
       bit_size: 4
 fieldset/ISR:
-  description: "initialization and status\r register"
+  description: "initialization and status register"
   fields:
     - name: ALRAWF
       description: Alarm A write flag
@@ -399,7 +399,7 @@ fieldset/ISR:
       bit_offset: 4
       bit_size: 1
     - name: RSF
-      description: "Registers synchronization\r flag"
+      description: "Registers synchronization flag"
       bit_offset: 5
       bit_size: 1
     - name: INITF
@@ -450,7 +450,7 @@ fieldset/OR:
   description: option register
   fields:
     - name: RTC_ALARM_TYPE
-      description: "RTC_ALARM on PC13 output\r type"
+      description: "RTC_ALARM on PC13 output type"
       bit_offset: 0
       bit_size: 1
     - name: RTC_OUT_RMP
@@ -461,18 +461,18 @@ fieldset/PRER:
   description: prescaler register
   fields:
     - name: PREDIV_S
-      description: "Synchronous prescaler\r factor"
+      description: "Synchronous prescaler factor"
       bit_offset: 0
       bit_size: 15
     - name: PREDIV_A
-      description: "Asynchronous prescaler\r factor"
+      description: "Asynchronous prescaler factor"
       bit_offset: 16
       bit_size: 7
 fieldset/SHIFTR:
   description: shift control register
   fields:
     - name: SUBFS
-      description: "Subtract a fraction of a\r second"
+      description: "Subtract a fraction of a second"
       bit_offset: 0
       bit_size: 15
     - name: ADD1S
@@ -518,7 +518,7 @@ fieldset/TAMPCR:
       bit_offset: 6
       bit_size: 1
     - name: TAMPTS
-      description: "Activate timestamp on tamper detection\r event"
+      description: "Activate timestamp on tamper detection event"
       bit_offset: 7
       bit_size: 1
     - name: TAMPFREQ
@@ -676,6 +676,6 @@ fieldset/WUTR:
   description: wakeup timer register
   fields:
     - name: WUT
-      description: "Wakeup auto-reload value\r bits"
+      description: "Wakeup auto-reload value bits"
       bit_offset: 0
       bit_size: 16