From 3447a8f6eb1ba4b4eb3a18b61dfd63a0c1c79dcf Mon Sep 17 00:00:00 2001
From: eZio Pan <eziopan@qq.com>
Date: Tue, 27 Feb 2024 19:49:51 +0800
Subject: [PATCH] add enum

---
 data/registers/opamp_h7.yaml | 82 ++++++++++++++++++++++++++++++++++++
 1 file changed, 82 insertions(+)

diff --git a/data/registers/opamp_h7.yaml b/data/registers/opamp_h7.yaml
index 949d171..07fb6bb 100644
--- a/data/registers/opamp_h7.yaml
+++ b/data/registers/opamp_h7.yaml
@@ -24,26 +24,32 @@ fieldset/CSR:
     description: Force internal reference on VP (reserved for test.
     bit_offset: 1
     bit_size: 1
+    enum: FORCE_VP
   - name: VP_SEL
     description: Operational amplifier PGA mode.
     bit_offset: 2
     bit_size: 2
+    enum: VP_SEL
   - name: VM_SEL
     description: Inverting input selection.
     bit_offset: 5
     bit_size: 2
+    enum: VM_SEL
   - name: OPAHSM
     description: Operational amplifier high-speed mode.
     bit_offset: 8
     bit_size: 1
+    enum: OPAHSM
   - name: CALON
     description: Calibration mode enabled.
     bit_offset: 11
     bit_size: 1
+    enum: CALON
   - name: CALSEL
     description: Calibration selection.
     bit_offset: 12
     bit_size: 2
+    enum: CALSEL
   - name: PGA_GAIN
     description: allows to switch from AOP offset trimmed values to AOP offset.
     bit_offset: 14
@@ -60,6 +66,7 @@ fieldset/CSR:
     description: Operational amplifier calibration output.
     bit_offset: 30
     bit_size: 1
+    enum: CALOUT
 fieldset/HSOTR:
   description: OPAMP1 offset trimming register in low-power mode.
   fields:
@@ -82,3 +89,78 @@ fieldset/OTR:
     description: Trim for PMOS differential pairs.
     bit_offset: 8
     bit_size: 5
+enum/CALON:
+  bit_size: 1
+  variants:
+  - name: Normal
+    description: Normal mode
+    value: 0
+  - name: Calibration
+    description: Calibration mode (all switches opened by HW)
+    value: 1
+enum/CALOUT:
+  bit_size: 1
+  variants:
+  - name: Less
+    description: Non-inverting < inverting
+    value: 0
+  - name: Greater
+    description: Non-inverting > inverting
+    value: 1
+enum/CALSEL:
+  bit_size: 2
+  variants:
+  - name: Percent3_3
+    description: VREFOPAMP=3.3% VDDA.
+    value: 0
+  - name: Percent10
+    description: VREFOPAMP=10% VDDA.
+    value: 1
+  - name: Percent50
+    description: VREFOPAMP=50% VDDA.
+    value: 2
+  - name: Percent90
+    description: VREFOPAMP=90% VDDA.
+    value: 3
+enum/OPAHSM:
+  bit_size: 1
+  variants:
+  - name: Normal
+    description: operational amplifier in normal mode
+    value: 0
+  - name: HighSpeed
+    description: operational amplifier in high-speed mode
+    value: 1
+enum/VM_SEL:
+  bit_size: 2
+  variants:
+  - name: Inm0
+    description: INM0 connected to OPAMP_VINM input
+    value: 0
+  - name: Inm1
+    description: INM1 connected to OPAMP_VINM input
+    value: 1
+  - name: Pga
+    description: Feedback resistor is connected to the OPAMP_VINM input (PGA mode), Inverting input selection depends on the PGA_GAIN setting
+    value: 2
+  - name: Follower
+    description: opamp_out connected to OPAMP_VINM input (Follower mode)
+    value: 3
+enum/VP_SEL:
+  bit_size: 2
+  variants:
+  - name: Gpio
+    description: GPIO connected to OPAMPx_VINP
+    value: 0
+  - name: DacOut
+    description: dac_outx connected to OPAMPx_VINP
+    value: 1
+enum/FORCE_VP:
+  bit_size: 1
+  variants:
+  - name: NormalOperating
+    description: Normal operating mode. Non-inverting input connected to inputs.
+    value: 0
+  - name: CalibrationVerification
+    description: Calibration verification mode. Non-inverting input connected to calibration reference voltage.
+    value: 1
\ No newline at end of file