From 10fcc5d9dd2b874f6a17dbdf0a7d8154f7ecc467 Mon Sep 17 00:00:00 2001 From: Dario Nieuwenhuis Date: Tue, 17 Jan 2023 18:51:41 +0100 Subject: [PATCH] Add stm32c0, fixes for updated stm32-data-sources. --- Cargo.toml | 2 +- data/registers/dbgmcu_c0.yaml | 85 +++ data/registers/exti_c0.yaml | 80 +++ data/registers/flash_c0.yaml | 424 +++++++++++++++ data/registers/pwr_c0.yaml | 134 +++++ data/registers/rcc_c0.yaml | 964 ++++++++++++++++++++++++++++++++++ data/registers/syscfg_c0.yaml | 516 ++++++++++++++++++ src/chips.rs | 44 +- src/dma.rs | 8 +- src/docs.rs | 2 + src/interrupts.rs | 1 + 11 files changed, 2247 insertions(+), 13 deletions(-) create mode 100644 data/registers/dbgmcu_c0.yaml create mode 100644 data/registers/exti_c0.yaml create mode 100644 data/registers/flash_c0.yaml create mode 100644 data/registers/pwr_c0.yaml create mode 100644 data/registers/rcc_c0.yaml create mode 100644 data/registers/syscfg_c0.yaml diff --git a/Cargo.toml b/Cargo.toml index c4e791b..0cff7f4 100644 --- a/Cargo.toml +++ b/Cargo.toml @@ -17,7 +17,7 @@ quick-xml = { version = "0.26.0", features = ["serialize"] } regex = "1.6.0" serde = { version = "1.0.147", features = ["derive"] } serde_yaml = "0.9.14" -chiptool = { git = "https://github.com/embassy-rs/chiptool", rev = "28ffa8a19d84914089547f52900ffb5877a5dc23" } +chiptool = { git = "https://github.com/embassy-rs/chiptool", rev = "1d9e0a39a6acc291e50cabc4ed617a87f06d5e89" } serde_json = "1.0.87" rayon = { version = "1.5.3", optional = true } stm32-data-serde = { version = "0.1.0", path = "stm32-data-serde" } diff --git a/data/registers/dbgmcu_c0.yaml b/data/registers/dbgmcu_c0.yaml new file mode 100644 index 0000000..aacbd38 --- /dev/null +++ b/data/registers/dbgmcu_c0.yaml @@ -0,0 +1,85 @@ +--- +block/DBGMCU: + description: Debug support + items: + - name: IDCODE + description: MCU Device ID Code Register + byte_offset: 0 + access: Read + fieldset: IDCODE + - name: CR + description: Debug MCU Configuration Register + byte_offset: 4 + fieldset: CR + - name: APB1FZR + description: DBG APB freeze register 1 + byte_offset: 8 + fieldset: APB1FZR + - name: APB2FZR + description: DBG APB freeze register 2 + byte_offset: 12 + fieldset: APB2FZR +fieldset/APB1FZR: + description: DBG APB freeze register 1 + fields: + - name: TIM3 + description: TIM3 counter stopped when core is halted + bit_offset: 1 + bit_size: 1 + - name: RTC + description: Debug RTC stopped when Core is halted + bit_offset: 10 + bit_size: 1 + - name: WWDG + description: Debug Window Wachdog stopped when Core is halted + bit_offset: 11 + bit_size: 1 + - name: IWDG + description: Debug Independent Wachdog stopped when Core is halted + bit_offset: 12 + bit_size: 1 + - name: I2C1 + description: I2C1 SMBUS timeout mode stopped when core is halted + bit_offset: 21 + bit_size: 1 +fieldset/APB2FZR: + description: DBG APB freeze register 2 + fields: + - name: TIM1 + description: TIM1 + bit_offset: 11 + bit_size: 1 + - name: TIM14 + description: TIM14 + bit_offset: 15 + bit_size: 1 + - name: TIM16 + description: TIM16 + bit_offset: 17 + bit_size: 1 + - name: TIM17 + description: TIM17 + bit_offset: 18 + bit_size: 1 +fieldset/CR: + description: Debug MCU Configuration Register + fields: + - name: DBG_STOP + description: Debug Stop Mode + bit_offset: 1 + bit_size: 1 + - name: DBG_STANDBY + description: Debug Standby Mode + bit_offset: 2 + bit_size: 1 +fieldset/IDCODE: + description: MCU Device ID Code Register + fields: + - name: DEV_ID + description: Device Identifier + bit_offset: 0 + bit_size: 16 + - name: REV_ID + description: Revision Identifier + bit_offset: 16 + bit_size: 16 diff --git a/data/registers/exti_c0.yaml b/data/registers/exti_c0.yaml new file mode 100644 index 0000000..8ab29ae --- /dev/null +++ b/data/registers/exti_c0.yaml @@ -0,0 +1,80 @@ +--- +block/EXTI: + description: External interrupt/event controller + items: + - name: RTSR + description: Rising Trigger selection register + array: + len: 1 + stride: 40 + byte_offset: 0 + fieldset: LINES + - name: FTSR + description: Falling Trigger selection register + array: + len: 1 + stride: 40 + byte_offset: 4 + fieldset: LINES + - name: SWIER + description: Software interrupt event register + array: + len: 1 + stride: 40 + byte_offset: 8 + fieldset: LINES + - name: RPR + description: Rising pending register + array: + len: 1 + stride: 40 + byte_offset: 12 + fieldset: LINES + - name: FPR + description: Falling pending register + array: + len: 1 + stride: 40 + byte_offset: 16 + fieldset: LINES + - name: EXTICR + description: Configuration register + array: + len: 4 + stride: 4 + byte_offset: 96 + fieldset: EXTICR + - name: IMR + description: Interrupt mask register + array: + len: 1 + stride: 16 + byte_offset: 128 + fieldset: LINES + - name: EMR + description: Event mask register + array: + len: 1 + stride: 16 + byte_offset: 132 + fieldset: LINES +fieldset/EXTICR: + description: external interrupt configuration register 1 + fields: + - name: EXTI + description: EXTI configuration bits + bit_offset: 0 + bit_size: 8 + array: + len: 4 + stride: 8 +fieldset/LINES: + description: "EXTI lines register, 1 bit per line" + fields: + - name: LINE + description: EXTI line + bit_offset: 0 + bit_size: 1 + array: + len: 32 + stride: 1 diff --git a/data/registers/flash_c0.yaml b/data/registers/flash_c0.yaml new file mode 100644 index 0000000..1babeb4 --- /dev/null +++ b/data/registers/flash_c0.yaml @@ -0,0 +1,424 @@ +--- +block/FLASH: + description: Flash + items: + - name: ACR + description: Access control register + byte_offset: 0 + fieldset: ACR + - name: KEYR + description: Flash key register + byte_offset: 8 + access: Write + fieldset: KEYR + - name: OPTKEYR + description: Option byte key register + byte_offset: 12 + access: Write + fieldset: OPTKEYR + - name: SR + description: Status register + byte_offset: 16 + fieldset: SR + - name: CR + description: Flash control register + byte_offset: 20 + fieldset: CR + - name: OPTR + description: Flash option register + byte_offset: 32 + fieldset: OPTR + - name: PCROP1ASR + description: Flash PCROP zone A Start address register + byte_offset: 36 + access: Read + fieldset: PCROP1ASR + - name: PCROP1AER + description: Flash PCROP zone A End address register + byte_offset: 40 + access: Read + fieldset: PCROP1AER + - name: WRP1AR + description: Flash WRP area A address register + byte_offset: 44 + access: Read + fieldset: WRP1AR + - name: WRP1BR + description: Flash WRP area B address register + byte_offset: 48 + access: Read + fieldset: WRP1BR + - name: PCROP1BSR + description: Flash PCROP zone B Start address register + byte_offset: 52 + access: Read + fieldset: PCROP1BSR + - name: PCROP1BER + description: Flash PCROP zone B End address register + byte_offset: 56 + access: Read + fieldset: PCROP1BER + - name: SECR + description: Flash Security register + byte_offset: 128 + access: Read + fieldset: SECR +fieldset/ACR: + description: Access control register + fields: + - name: LATENCY + description: Latency + bit_offset: 0 + bit_size: 3 + enum: LATENCY + - name: PRFTEN + description: Prefetch enable + bit_offset: 8 + bit_size: 1 + - name: ICEN + description: Instruction cache enable + bit_offset: 9 + bit_size: 1 + - name: ICRST + description: Instruction cache reset + bit_offset: 11 + bit_size: 1 + - name: EMPTY + description: Flash User area empty + bit_offset: 16 + bit_size: 1 + - name: DBG_SWEN + description: Debug access software enable + bit_offset: 18 + bit_size: 1 +fieldset/CR: + description: Flash control register + fields: + - name: PG + description: Programming + bit_offset: 0 + bit_size: 1 + - name: PER + description: Page erase + bit_offset: 1 + bit_size: 1 + - name: MER + description: Mass erase + bit_offset: 2 + bit_size: 1 + - name: PNB + description: Page number + bit_offset: 3 + bit_size: 4 + - name: STRT + description: Start + bit_offset: 16 + bit_size: 1 + - name: OPTSTRT + description: Options modification start + bit_offset: 17 + bit_size: 1 + - name: FSTPG + description: Fast programming + bit_offset: 18 + bit_size: 1 + - name: EOPIE + description: End of operation interrupt enable + bit_offset: 24 + bit_size: 1 + - name: ERRIE + description: Error interrupt enable + bit_offset: 25 + bit_size: 1 + - name: RDERRIE + description: PCROP read error interrupt enable + bit_offset: 26 + bit_size: 1 + - name: OBL_LAUNCH + description: Force the option byte loading + bit_offset: 27 + bit_size: 1 + - name: SEC_PROT + description: Securable memory area protection enable + bit_offset: 28 + bit_size: 1 + - name: OPTLOCK + description: Options Lock + bit_offset: 30 + bit_size: 1 + - name: LOCK + description: FLASH_CR Lock + bit_offset: 31 + bit_size: 1 +fieldset/KEYR: + description: Flash key register + fields: + - name: KEYR + description: KEYR + bit_offset: 0 + bit_size: 32 +fieldset/OPTKEYR: + description: Option byte key register + fields: + - name: OPTKEYR + description: Option byte key + bit_offset: 0 + bit_size: 32 +fieldset/OPTR: + description: Flash option register + fields: + - name: RDP + description: Read protection level + bit_offset: 0 + bit_size: 8 + enum: RDP + - name: BOREN + description: BOR reset Level + bit_offset: 8 + bit_size: 1 + - name: BORF_LEV + description: These bits contain the VDD supply level threshold that activates the reset + bit_offset: 9 + bit_size: 2 + enum: BORF_LEV + - name: BORR_LEV + description: These bits contain the VDD supply level threshold that releases the reset. + bit_offset: 11 + bit_size: 2 + enum: BORR_LEV + - name: nRST_STOP + description: nRST_STOP + bit_offset: 13 + bit_size: 1 + - name: nRST_STDBY + description: nRST_STDBY + bit_offset: 14 + bit_size: 1 + - name: nRSTS_HDW + description: nRSTS_HDW + bit_offset: 15 + bit_size: 1 + - name: IDWG_SW + description: Independent watchdog selection + bit_offset: 16 + bit_size: 1 + - name: IWDG_STOP + description: Independent watchdog counter freeze in Stop mode + bit_offset: 17 + bit_size: 1 + - name: IWDG_STDBY + description: Independent watchdog counter freeze in Standby mode + bit_offset: 18 + bit_size: 1 + - name: WWDG_SW + description: Window watchdog selection + bit_offset: 19 + bit_size: 1 + - name: RAM_PARITY_CHECK + description: SRAM parity check control + bit_offset: 22 + bit_size: 1 + - name: nBOOT_SEL + description: nBOOT_SEL + bit_offset: 24 + bit_size: 1 + - name: nBOOT1 + description: Boot configuration + bit_offset: 25 + bit_size: 1 + - name: nBOOT0 + description: nBOOT0 option bit + bit_offset: 26 + bit_size: 1 + - name: NRST_MODE + description: NRST_MODE + bit_offset: 27 + bit_size: 2 + enum: NRST_MODE + - name: IRHEN + description: Internal reset holder enable bit + bit_offset: 29 + bit_size: 1 +fieldset/PCROP1AER: + description: Flash PCROP zone A End address register + fields: + - name: PCROP1A_END + description: PCROP1A area end offset + bit_offset: 0 + bit_size: 6 + - name: PCROP_RDP + description: PCROP area preserved when RDP level decreased + bit_offset: 31 + bit_size: 1 +fieldset/PCROP1ASR: + description: Flash PCROP zone A Start address register + fields: + - name: PCROP1A_STRT + description: PCROP1A area start offset + bit_offset: 0 + bit_size: 6 +fieldset/PCROP1BER: + description: Flash PCROP zone B End address register + fields: + - name: PCROP1B_END + description: PCROP1B area end offset + bit_offset: 0 + bit_size: 6 +fieldset/PCROP1BSR: + description: Flash PCROP zone B Start address register + fields: + - name: PCROP1B_STRT + description: PCROP1B area start offset + bit_offset: 0 + bit_size: 6 +fieldset/SECR: + description: Flash Security register + fields: + - name: SEC_SIZE + description: Securable memory area size + bit_offset: 0 + bit_size: 5 + - name: BOOT_LOCK + description: used to force boot from user area + bit_offset: 16 + bit_size: 1 +fieldset/SR: + description: Status register + fields: + - name: EOP + description: End of operation + bit_offset: 0 + bit_size: 1 + - name: OPERR + description: Operation error + bit_offset: 1 + bit_size: 1 + - name: PROGERR + description: Programming error + bit_offset: 3 + bit_size: 1 + - name: WRPERR + description: Write protected error + bit_offset: 4 + bit_size: 1 + - name: PGAERR + description: Programming alignment error + bit_offset: 5 + bit_size: 1 + - name: SIZERR + description: Size error + bit_offset: 6 + bit_size: 1 + - name: PGSERR + description: Programming sequence error + bit_offset: 7 + bit_size: 1 + - name: MISERR + description: Fast programming data miss error + bit_offset: 8 + bit_size: 1 + - name: FASTERR + description: Fast programming error + bit_offset: 9 + bit_size: 1 + - name: RDERR + description: PCROP read error + bit_offset: 14 + bit_size: 1 + - name: OPTVERR + description: Option and Engineering bits loading validity error + bit_offset: 15 + bit_size: 1 + - name: BSY + description: Busy + bit_offset: 16 + bit_size: 1 + - name: CFGBSY + description: Programming or erase configuration busy. + bit_offset: 18 + bit_size: 1 +fieldset/WRP1AR: + description: Flash WRP area A address register + fields: + - name: WRP1A_STRT + description: WRP area A start offset + bit_offset: 0 + bit_size: 6 + - name: WRP1A_END + description: WRP area A end offset + bit_offset: 16 + bit_size: 6 +fieldset/WRP1BR: + description: Flash WRP area B address register + fields: + - name: WRP1B_STRT + description: WRP area B start offset + bit_offset: 0 + bit_size: 6 + - name: WRP1B_END + description: WRP area B end offset + bit_offset: 16 + bit_size: 6 +enum/BORF_LEV: + bit_size: 2 + variants: + - name: FALLING_0 + description: BOR falling level 1 with threshold around 2.0V + value: 0 + - name: FALLING_1 + description: BOR falling level 2 with threshold around 2.2V + value: 1 + - name: FALLING_2 + description: BOR falling level 3 with threshold around 2.5V + value: 2 + - name: FALLING_3 + description: BOR falling level 4 with threshold around 2.8V + value: 3 +enum/BORR_LEV: + bit_size: 2 + variants: + - name: RISING_0 + description: BOR rising level 1 with threshold around 2.1V + value: 0 + - name: RISING_1 + description: BOR rising level 2 with threshold around 2.3V + value: 1 + - name: RISING_2 + description: BOR rising level 3 with threshold around 2.6V + value: 2 + - name: RISING_3 + description: BOR rising level 4 with threshold around 2.9V + value: 3 +enum/LATENCY: + bit_size: 3 + variants: + - name: WS0 + description: Zero wait states + value: 0 + - name: WS1 + description: One wait state + value: 1 +enum/NRST_MODE: + bit_size: 2 + variants: + - name: INPUT_ONLY + description: Reset pin is in reset input mode only + value: 1 + - name: GPIO + description: Reset pin is in GPIO mode only + value: 2 + - name: INPUT_OUTPUT + description: Reset pin is in resety input and output mode + value: 3 +enum/RDP: + bit_size: 8 + variants: + - name: LEVEL_0 + description: Read protection not active + value: 170 + - name: LEVEL_1 + description: Memories read protection active + value: 187 + - name: LEVEL_2 + description: Chip read protection active + value: 204 diff --git a/data/registers/pwr_c0.yaml b/data/registers/pwr_c0.yaml new file mode 100644 index 0000000..eb0628c --- /dev/null +++ b/data/registers/pwr_c0.yaml @@ -0,0 +1,134 @@ +--- +block/PWR: + description: PWR address block description + items: + - name: CR1 + description: PWR control register 1 + byte_offset: 0 + fieldset: CR1 + - name: CR3 + description: PWR control register 3 + byte_offset: 8 + fieldset: CR3 + - name: CR4 + description: PWR control register 4 + byte_offset: 12 + fieldset: CR4 + - name: SR1 + description: PWR status register 1 + byte_offset: 16 + fieldset: SR1 + - name: SR2 + description: PWR status register 2 + byte_offset: 20 + fieldset: SR2 + - name: SCR + description: PWR status clear register + byte_offset: 24 + fieldset: SCR + - name: PUCR + description: PWR Port pull-up control register + array: + len: 6 + stride: 8 + byte_offset: 32 + fieldset: PCR + - name: PDCR + description: PWR Port pull-down control register + array: + len: 6 + stride: 8 + byte_offset: 36 + fieldset: PCR +fieldset/CR1: + description: PWR control register 1 + fields: + - name: LPMS + description: "Low-power mode selection\r These bits select the low-power mode entered when CPU enters deepsleep mode.\r 1XX: Shutdown mode" + bit_offset: 0 + bit_size: 3 + - name: FPD_STOP + description: "Flash memory powered down during Stop mode\r This bit determines whether the Flash memory is put in power-down mode or remains in idle mode when the device enters Stop mode." + bit_offset: 3 + bit_size: 1 + - name: FPD_SLP + description: "Flash memory powered down during Sleep mode\r This bit determines whether the Flash memory is put in power-down mode or remains in idle mode when the device enters Sleep mode." + bit_offset: 5 + bit_size: 1 +fieldset/CR3: + description: PWR control register 3 + fields: + - name: EWUP + description: Enable Wakeup pin + bit_offset: 0 + bit_size: 1 + array: + len: 6 + stride: 1 + - name: APC + description: "Apply pull-up and pull-down configuration\r This bit determines whether the I/O pull-up and pull-down configurations defined in the PWR_PUCRx and PWR_PDCRx registers are applied." + bit_offset: 10 + bit_size: 1 + - name: EIWUL + description: "Enable internal wakeup line\r When set, a rising edge on the internal wakeup line triggers a wakeup event." + bit_offset: 15 + bit_size: 1 +fieldset/CR4: + description: PWR control register 4 + fields: + - name: WP + description: Wakeup pin WKUP1 polarity + bit_offset: 0 + bit_size: 1 + array: + len: 6 + stride: 1 +fieldset/PCR: + description: Power Port pull control register + fields: + - name: P + description: Port pull bit y (y=0..15) + bit_offset: 0 + bit_size: 1 + array: + len: 16 + stride: 1 +fieldset/SCR: + description: PWR status clear register + fields: + - name: CWUF + description: Clear Wakeup flag + bit_offset: 0 + bit_size: 1 + array: + len: 6 + stride: 1 + - name: CSBF + description: "Clear standby flag\r Setting this bit clears the SBF flag in the PWR_SR1 register." + bit_offset: 8 + bit_size: 1 +fieldset/SR1: + description: PWR status register 1 + fields: + - name: WUF + description: Wakeup flag + bit_offset: 0 + bit_size: 1 + array: + len: 6 + stride: 1 + - name: SBF + description: "Standby/Shutdown flag\r This bit is set by hardware when the device enters Standby or Shutdown mode and is cleared by setting the CSBF bit in the PWR_SCR register, or by a power-on reset. It is not cleared by the system reset." + bit_offset: 8 + bit_size: 1 + - name: WUFI + description: "Wakeup flag internal\r This bit is set when a wakeup condition is detected on the internal wakeup line. It is cleared when all internal wakeup sources are cleared." + bit_offset: 15 + bit_size: 1 +fieldset/SR2: + description: PWR status register 2 + fields: + - name: FLASH_RDY + description: "Flash ready flag\r This bit is set by hardware to indicate when the Flash memory is ready to be accessed after wakeup from power-down. To place the Flash memory in power-down, set either FPD_SLP or FPD_STP bit.\r Note: If the system boots from SRAM, the user application must wait till FLASH_RDY bit is set, prior to jumping to Flash memory." + bit_offset: 7 + bit_size: 1 diff --git a/data/registers/rcc_c0.yaml b/data/registers/rcc_c0.yaml new file mode 100644 index 0000000..6e5d53d --- /dev/null +++ b/data/registers/rcc_c0.yaml @@ -0,0 +1,964 @@ +--- +block/RCC: + description: RCC address block description + items: + - name: CR + description: RCC clock control register + byte_offset: 0 + fieldset: CR + - name: ICSCR + description: RCC internal clock source calibration register + byte_offset: 4 + fieldset: ICSCR + - name: CFGR + description: RCC clock configuration register + byte_offset: 8 + fieldset: CFGR + - name: CIER + description: RCC clock interrupt enable register + byte_offset: 24 + fieldset: CIER + - name: CIFR + description: RCC clock interrupt flag register + byte_offset: 28 + fieldset: CIFR + - name: CICR + description: RCC clock interrupt clear register + byte_offset: 32 + fieldset: CICR + - name: GPIORSTR + description: RCC I/O port reset register + byte_offset: 36 + fieldset: GPIORSTR + - name: AHBRSTR + description: RCC AHB peripheral reset register + byte_offset: 40 + fieldset: AHBRSTR + - name: APBRSTR1 + description: RCC APB peripheral reset register 1 + byte_offset: 44 + fieldset: APBRSTR1 + - name: APBRSTR2 + description: RCC APB peripheral reset register 2 + byte_offset: 48 + fieldset: APBRSTR2 + - name: GPIOENR + description: RCC I/O port clock enable register + byte_offset: 52 + fieldset: GPIOENR + - name: AHBENR + description: RCC AHB peripheral clock enable register + byte_offset: 56 + fieldset: AHBENR + - name: APBENR1 + description: RCC APB peripheral clock enable register 1 + byte_offset: 60 + fieldset: APBENR1 + - name: APBENR2 + description: RCC APB peripheral clock enable register 2 + byte_offset: 64 + fieldset: APBENR2 + - name: GPIOSMENR + description: RCC I/O port in Sleep mode clock enable register + byte_offset: 68 + fieldset: GPIOSMENR + - name: AHBSMENR + description: RCC AHB peripheral clock enable in Sleep/Stop mode register + byte_offset: 72 + fieldset: AHBSMENR + - name: APBSMENR1 + description: RCC APB peripheral clock enable in Sleep/Stop mode register 1 + byte_offset: 76 + fieldset: APBSMENR1 + - name: APBSMENR2 + description: RCC APB peripheral clock enable in Sleep/Stop mode register 2 + byte_offset: 80 + fieldset: APBSMENR2 + - name: CCIPR + description: RCC peripherals independent clock configuration register + byte_offset: 84 + fieldset: CCIPR + - name: CSR1 + description: RCC control/status register 1 + byte_offset: 92 + fieldset: CSR1 + - name: CSR2 + description: RCC control/status register 2 + byte_offset: 96 + fieldset: CSR2 +fieldset/AHBENR: + description: RCC AHB peripheral clock enable register + fields: + - name: DMA1EN + description: "DMA1 and DMAMUX clock enable\r Set and cleared by software.\r DMAMUX is enabled as long as at least one DMA peripheral is enabled." + bit_offset: 0 + bit_size: 1 + - name: FLASHEN + description: "Flash memory interface clock enable\r Set and cleared by software.\r This bit can only be cleared when the Flash memory is in power down mode." + bit_offset: 8 + bit_size: 1 + - name: CRCEN + description: "CRC clock enable\r Set and cleared by software." + bit_offset: 12 + bit_size: 1 +fieldset/AHBRSTR: + description: RCC AHB peripheral reset register + fields: + - name: DMA1RST + description: "DMA1 and DMAMUX reset\r Set and cleared by software." + bit_offset: 0 + bit_size: 1 + - name: FLASHRST + description: "Flash memory interface reset\r Set and cleared by software.\r This bit can only be set when the Flash memory is in power down mode." + bit_offset: 8 + bit_size: 1 + - name: CRCRST + description: "CRC reset\r Set and cleared by software." + bit_offset: 12 + bit_size: 1 +fieldset/AHBSMENR: + description: RCC AHB peripheral clock enable in Sleep/Stop mode register + fields: + - name: DMA1SMEN + description: "DMA1 and DMAMUX clock enable during Sleep mode\r Set and cleared by software.\r Clock to DMAMUX during Sleep mode is enabled as long as the clock in Sleep mode is enabled to at least one DMA peripheral." + bit_offset: 0 + bit_size: 1 + - name: FLASHSMEN + description: "Flash memory interface clock enable during Sleep mode\r Set and cleared by software.\r This bit can be activated only when the Flash memory is in power down mode." + bit_offset: 8 + bit_size: 1 + - name: SRAMSMEN + description: "SRAM clock enable during Sleep mode\r Set and cleared by software." + bit_offset: 9 + bit_size: 1 + - name: CRCSMEN + description: "CRC clock enable during Sleep mode\r Set and cleared by software." + bit_offset: 12 + bit_size: 1 +fieldset/APBENR1: + description: RCC APB peripheral clock enable register 1 + fields: + - name: TIM3EN + description: "TIM3 timer clock enable\r Set and cleared by software." + bit_offset: 1 + bit_size: 1 + - name: RTCAPBEN + description: "RTC APB clock enable\r Set and cleared by software." + bit_offset: 10 + bit_size: 1 + - name: WWDGEN + description: "WWDG clock enable\r Set by software to enable the window watchdog clock. Cleared by hardware system reset\r This bit can also be set by hardware if the WWDG_SW option bit is 0." + bit_offset: 11 + bit_size: 1 + - name: USART2EN + description: "USART2 clock enable\r Set and cleared by software." + bit_offset: 17 + bit_size: 1 + - name: I2C1EN + description: "I2C1 clock enable\r Set and cleared by software." + bit_offset: 21 + bit_size: 1 + - name: DBGEN + description: "Debug support clock enable\r Set and cleared by software." + bit_offset: 27 + bit_size: 1 + - name: PWREN + description: "Power interface clock enable\r Set and cleared by software." + bit_offset: 28 + bit_size: 1 +fieldset/APBENR2: + description: RCC APB peripheral clock enable register 2 + fields: + - name: SYSCFGEN + description: "SYSCFG clock enable\r Set and cleared by software." + bit_offset: 0 + bit_size: 1 + - name: TIM1EN + description: "TIM1 timer clock enable\r Set and cleared by software." + bit_offset: 11 + bit_size: 1 + - name: SPI1EN + description: "SPI1 clock enable\r Set and cleared by software." + bit_offset: 12 + bit_size: 1 + - name: USART1EN + description: "USART1 clock enable\r Set and cleared by software." + bit_offset: 14 + bit_size: 1 + - name: TIM14EN + description: "TIM14 timer clock enable\r Set and cleared by software." + bit_offset: 15 + bit_size: 1 + - name: TIM16EN + description: "TIM16 timer clock enable\r Set and cleared by software." + bit_offset: 17 + bit_size: 1 + - name: TIM17EN + description: "TIM16 timer clock enable\r Set and cleared by software." + bit_offset: 18 + bit_size: 1 + - name: ADCEN + description: "ADC clock enable\r Set and cleared by software." + bit_offset: 20 + bit_size: 1 +fieldset/APBRSTR1: + description: RCC APB peripheral reset register 1 + fields: + - name: TIM3RST + description: "TIM3 timer reset\r Set and cleared by software." + bit_offset: 1 + bit_size: 1 + - name: USART2RST + description: "USART2 reset\r Set and cleared by software." + bit_offset: 17 + bit_size: 1 + - name: I2C1RST + description: "I2C1 reset\r Set and cleared by software." + bit_offset: 21 + bit_size: 1 + - name: DBGRST + description: "Debug support reset\r Set and cleared by software." + bit_offset: 27 + bit_size: 1 + - name: PWRRST + description: "Power interface reset\r Set and cleared by software." + bit_offset: 28 + bit_size: 1 +fieldset/APBRSTR2: + description: RCC APB peripheral reset register 2 + fields: + - name: SYSCFGRST + description: "SYSCFG reset\r Set and cleared by software." + bit_offset: 0 + bit_size: 1 + - name: TIM1RST + description: "TIM1 timer reset\r Set and cleared by software." + bit_offset: 11 + bit_size: 1 + - name: SPI1RST + description: "SPI1 reset\r Set and cleared by software." + bit_offset: 12 + bit_size: 1 + - name: USART1RST + description: "USART1 reset\r Set and cleared by software." + bit_offset: 14 + bit_size: 1 + - name: TIM14RST + description: "TIM14 timer reset\r Set and cleared by software." + bit_offset: 15 + bit_size: 1 + - name: TIM16RST + description: "TIM16 timer reset\r Set and cleared by software." + bit_offset: 17 + bit_size: 1 + - name: TIM17RST + description: "TIM16 timer reset\r Set and cleared by software." + bit_offset: 18 + bit_size: 1 + - name: ADCRST + description: "ADC reset\r Set and cleared by software." + bit_offset: 20 + bit_size: 1 +fieldset/APBSMENR1: + description: RCC APB peripheral clock enable in Sleep/Stop mode register 1 + fields: + - name: TIM3SMEN + description: "TIM3 timer clock enable during Sleep mode\r Set and cleared by software." + bit_offset: 1 + bit_size: 1 + - name: RTCAPBSMEN + description: "RTC APB clock enable during Sleep mode\r Set and cleared by software." + bit_offset: 10 + bit_size: 1 + - name: WWDGSMEN + description: "WWDG clock enable during Sleep and Stop modes\r Set and cleared by software." + bit_offset: 11 + bit_size: 1 + - name: USART2SMEN + description: "USART2 clock enable during Sleep and Stop modes\r Set and cleared by software." + bit_offset: 17 + bit_size: 1 + - name: I2C1SMEN + description: "I2C1 clock enable during Sleep and Stop modes\r Set and cleared by software." + bit_offset: 21 + bit_size: 1 + - name: DBGSMEN + description: "Debug support clock enable during Sleep mode\r Set and cleared by software." + bit_offset: 27 + bit_size: 1 + - name: PWRSMEN + description: "Power interface clock enable during Sleep mode\r Set and cleared by software." + bit_offset: 28 + bit_size: 1 +fieldset/APBSMENR2: + description: RCC APB peripheral clock enable in Sleep/Stop mode register 2 + fields: + - name: SYSCFGSMEN + description: "SYSCFG clock enable during Sleep and Stop modes\r Set and cleared by software." + bit_offset: 0 + bit_size: 1 + - name: TIM1SMEN + description: "TIM1 timer clock enable during Sleep mode\r Set and cleared by software." + bit_offset: 11 + bit_size: 1 + - name: SPI1SMEN + description: "SPI1 clock enable during Sleep mode\r Set and cleared by software." + bit_offset: 12 + bit_size: 1 + - name: USART1SMEN + description: "USART1 clock enable during Sleep and Stop modes\r Set and cleared by software." + bit_offset: 14 + bit_size: 1 + - name: TIM14SMEN + description: "TIM14 timer clock enable during Sleep mode\r Set and cleared by software." + bit_offset: 15 + bit_size: 1 + - name: TIM16SMEN + description: "TIM16 timer clock enable during Sleep mode\r Set and cleared by software." + bit_offset: 17 + bit_size: 1 + - name: TIM17SMEN + description: "TIM16 timer clock enable during Sleep mode\r Set and cleared by software." + bit_offset: 18 + bit_size: 1 + - name: ADCSMEN + description: "ADC clock enable during Sleep mode\r Set and cleared by software." + bit_offset: 20 + bit_size: 1 +fieldset/CCIPR: + description: RCC peripherals independent clock configuration register + fields: + - name: USART1SEL + description: "USART1 clock source selection\r This bitfield is controlled by software to select USART1 clock source as follows:" + bit_offset: 0 + bit_size: 2 + enum: USART1SEL + - name: I2C1SEL + description: "I2C1 clock source selection\r This bitfield is controlled by software to select I2C1 clock source as follows:" + bit_offset: 12 + bit_size: 2 + enum: I2C1SEL + - name: I2S1SEL + description: "I2S1 clock source selection\r This bitfield is controlled by software to select I2S1 clock source as follows:" + bit_offset: 14 + bit_size: 2 + enum: I2S1SEL + - name: ADCSEL + description: "ADCs clock source selection\r This bitfield is controlled by software to select the clock source for ADC:" + bit_offset: 30 + bit_size: 2 + enum: ADCSEL +fieldset/CFGR: + description: RCC clock configuration register + fields: + - name: SW + description: "System clock switch\r This bitfield is controlled by software and hardware. The bitfield selects the clock for SYSCLK as follows:\r Others: Reserved\r The setting is forced by hardware to 000 (HSISYS selected) when the MCU exits Stop, or Standby, or Shutdown mode, or when the setting is 001 (HSE selected) and HSE oscillator failure is detected." + bit_offset: 0 + bit_size: 3 + enum: SW + - name: SWS + description: "System clock switch status\r This bitfield is controlled by hardware to indicate the clock source used as system clock:\r Others: Reserved" + bit_offset: 3 + bit_size: 3 + enum: SW + - name: HPRE + description: "AHB prescaler\r This bitfield is controlled by software. To produce HCLK clock, it sets the division factor of SYSCLK clock as follows:\r 0xxx: 1" + bit_offset: 8 + bit_size: 4 + enum: HPRE + - name: PPRE + description: "APB prescaler\r This bitfield is controlled by software. To produce PCLK clock, it sets the division factor of HCLK clock as follows:\r 0xx: 1" + bit_offset: 12 + bit_size: 3 + enum: PPRE + - name: MCO2SEL + description: "Microcontroller clock output 2 clock selector\r This bitfield is controlled by software. It sets the clock selector for MCO2 output as follows:\r This bitfield is controlled by software. It sets the clock selector for MCO output as follows:\r Note: This clock output may have some truncated cycles at startup or during MCO2 clock source switching." + bit_offset: 16 + bit_size: 4 + enum: MCOSEL + - name: MCO2PRE + description: "Microcontroller clock output 2 prescaler\r This bitfield is controlled by software. It sets the division factor of the clock sent to the MCO2 output as follows:\r ...\r It is highly recommended to set this field before the MCO2 output is enabled." + bit_offset: 20 + bit_size: 4 + enum: MCOPRE + - name: MCOSEL + description: "Microcontroller clock output clock selector\r This bitfield is controlled by software. It sets the clock selector for MCO output as follows:\r Note: This clock output may have some truncated cycles at startup or during MCO clock source switching. Any other value means no clock on MCO." + bit_offset: 24 + bit_size: 4 + enum: MCOSEL + - name: MCOPRE + description: "Microcontroller clock output prescaler\r This bitfield is controlled by software. It sets the division factor of the clock sent to the MCO output as follows:\r ...\r It is highly recommended to set this field before the MCO output is enabled." + bit_offset: 28 + bit_size: 4 + enum: MCOPRE +fieldset/CICR: + description: RCC clock interrupt clear register + fields: + - name: LSIRDYC + description: "LSI ready interrupt clear\r This bit is set by software to clear the LSIRDYF flag." + bit_offset: 0 + bit_size: 1 + - name: LSERDYC + description: "LSE ready interrupt clear\r This bit is set by software to clear the LSERDYF flag." + bit_offset: 1 + bit_size: 1 + - name: HSIRDYC + description: "HSI16 ready interrupt clear\r This bit is set software to clear the HSIRDYF flag." + bit_offset: 3 + bit_size: 1 + - name: HSERDYC + description: "HSE ready interrupt clear\r This bit is set by software to clear the HSERDYF flag." + bit_offset: 4 + bit_size: 1 + - name: CSSC + description: "Clock security system interrupt clear\r This bit is set by software to clear the HSECSSF flag." + bit_offset: 8 + bit_size: 1 + - name: LSECSSC + description: "LSE Clock security system interrupt clear\r This bit is set by software to clear the LSECSSF flag." + bit_offset: 9 + bit_size: 1 +fieldset/CIER: + description: RCC clock interrupt enable register + fields: + - name: LSIRDYIE + description: "LSI ready interrupt enable\r Set and cleared by software to enable/disable interrupt caused by the LSI oscillator stabilization:" + bit_offset: 0 + bit_size: 1 + - name: LSERDYIE + description: "LSE ready interrupt enable\r Set and cleared by software to enable/disable interrupt caused by the LSE oscillator stabilization:" + bit_offset: 1 + bit_size: 1 + - name: HSIRDYIE + description: "HSI16 ready interrupt enable\r Set and cleared by software to enable/disable interrupt caused by the HSI16 oscillator stabilization:" + bit_offset: 3 + bit_size: 1 + - name: HSERDYIE + description: "HSE ready interrupt enable\r Set and cleared by software to enable/disable interrupt caused by the HSE oscillator stabilization:" + bit_offset: 4 + bit_size: 1 +fieldset/CIFR: + description: RCC clock interrupt flag register + fields: + - name: LSIRDYF + description: "LSI ready interrupt flag\r This flag indicates a pending interrupt upon LSE clock getting ready.\r Set by hardware when the LSI clock becomes stable and LSIRDYDIE is set.\r Cleared by software setting the LSIRDYC bit." + bit_offset: 0 + bit_size: 1 + - name: LSERDYF + description: "LSE ready interrupt flag\r This flag indicates a pending interrupt upon LSE clock getting ready.\r Set by hardware when the LSE clock becomes stable and LSERDYDIE is set.\r Cleared by software setting the LSERDYC bit." + bit_offset: 1 + bit_size: 1 + - name: HSIRDYF + description: "HSI16 ready interrupt flag\r This flag indicates a pending interrupt upon HSI16 clock getting ready.\r Set by hardware when the HSI16 clock becomes stable and HSIRDYIE is set in response to setting the HSION (refer to ). When HSION is not set but the HSI16 oscillator is enabled by the peripheral through a clock request, this bit is not set and no interrupt is generated.\r Cleared by software setting the HSIRDYC bit." + bit_offset: 3 + bit_size: 1 + - name: HSERDYF + description: "HSE ready interrupt flag\r This flag indicates a pending interrupt upon HSE clock getting ready.\r Set by hardware when the HSE clock becomes stable and HSERDYIE is set.\r Cleared by software setting the HSERDYC bit." + bit_offset: 4 + bit_size: 1 + - name: CSSF + description: "HSE clock security system interrupt flag\r This flag indicates a pending interrupt upon HSE clock failure.\r Set by hardware when a failure is detected in the HSE oscillator.\r Cleared by software setting the CSSC bit." + bit_offset: 8 + bit_size: 1 + - name: LSECSSF + description: "LSE clock security system interrupt flag\r This flag indicates a pending interrupt upon LSE clock failure.\r Set by hardware when a failure is detected in the LSE oscillator.\r Cleared by software by setting the LSECSSC bit." + bit_offset: 9 + bit_size: 1 +fieldset/CR: + description: RCC clock control register + fields: + - name: SYSDIV + description: "System clock division factor\r This bitfield controlled by software sets the division factor of the system clock divider to produce SYSCLK clock:" + bit_offset: 2 + bit_size: 3 + enum: SYSDIV + - name: HSIKERDIV + description: "HSI48 kernel clock division factor\r This bitfield controlled by software sets the division factor of the kernel clock divider to produce HSIKER clock:" + bit_offset: 5 + bit_size: 3 + enum: HSIKERDIV + - name: HSION + description: "HSI48 clock enable\r Set and cleared by software and hardware, with hardware taking priority.\r Kept low by hardware as long as the device is in a low-power mode.\r Kept high by hardware as long as the system is clocked with a clock derived from HSI48. This includes the exit from low-power modes and the system clock fall-back to HSI48 upon failing HSE oscillator clock selected as system clock source." + bit_offset: 8 + bit_size: 1 + - name: HSIKERON + description: "HSI48 always-enable for peripheral kernels.\r Set and cleared by software.\r Setting the bit activates the HSI48 oscillator in Run and Stop modes, regardless of the HSION bit state. The HSI48 clock can only feed USART1, USART2, and I2C1 peripherals configured with HSI48 as kernel clock.\r Note: Keeping the HSI48 active in Stop mode allows speeding up the serial interface communication as the HSI48 clock is ready immediately upon exiting Stop mode." + bit_offset: 9 + bit_size: 1 + - name: HSIRDY + description: "HSI48 clock ready flag\r Set by hardware when the HSI48 oscillator is enabled through HSION and ready to use (stable).\r Note: Upon clearing HSION, HSIRDY goes low after six HSI48 clock cycles." + bit_offset: 10 + bit_size: 1 + - name: HSIDIV + description: "HSI48 clock division factor\r This bitfield controlled by software sets the division factor of the HSI48 clock divider to produce HSISYS clock:" + bit_offset: 11 + bit_size: 3 + enum: HSIDIV + - name: HSEON + description: "HSE clock enable\r Set and cleared by software.\r Cleared by hardware to stop the HSE oscillator when entering Stop, or Standby, or Shutdown mode. This bit cannot be cleared if the HSE oscillator is used directly or indirectly as the system clock." + bit_offset: 16 + bit_size: 1 + - name: HSERDY + description: "HSE clock ready flag\r Set by hardware to indicate that the HSE oscillator is stable and ready for use.\r Note: Upon clearing HSEON, HSERDY goes low after six HSE clock cycles." + bit_offset: 17 + bit_size: 1 + - name: HSEBYP + description: "HSE crystal oscillator bypass\r Set and cleared by software.\r When the bit is set, the internal HSE oscillator is bypassed for use of an external clock. The external clock must then be enabled with the HSEON bit set. Write access to the bit is only effective when the HSE oscillator is disabled." + bit_offset: 18 + bit_size: 1 + - name: CSSON + description: "Clock security system enable\r Set by software to enable the clock security system. When the bit is set, the clock detector is enabled by hardware when the HSE oscillator is ready, and disabled by hardware if a HSE clock failure is detected. The bit is cleared by hardware upon reset." + bit_offset: 19 + bit_size: 1 +fieldset/CSR1: + description: RCC control/status register 1 + fields: + - name: LSEON + description: "LSE oscillator enable\r Set and cleared by software to enable LSE oscillator:" + bit_offset: 0 + bit_size: 1 + - name: LSERDY + description: "LSE oscillator ready\r Set and cleared by hardware to indicate when the external 32 kHz oscillator is ready (stable):\r After the LSEON bit is cleared, LSERDY goes low after 6 external low-speed oscillator clock cycles." + bit_offset: 1 + bit_size: 1 + - name: LSEBYP + description: "LSE oscillator bypass\r Set and cleared by software to bypass the LSE oscillator (in debug mode).\r This bit can be written only when the external 32 kHz oscillator is disabled (LSEON=0 and LSERDY=0)." + bit_offset: 2 + bit_size: 1 + - name: LSEDRV + description: "LSE oscillator drive capability\r Set by software to select the LSE oscillator drive capability as follows:\r Applicable when the LSE oscillator is in Xtal mode, as opposed to bypass mode." + bit_offset: 3 + bit_size: 2 + enum: LSEDRV + - name: LSECSSON + description: "CSS on LSE enable\r Set by software to enable the clock security system on LSE (32 kHz) oscillator as follows:\r LSECSSON must be enabled after the LSE oscillator is enabled (LSEON bit enabled) and ready (LSERDY flag set by hardware), and after the RTCSEL bit is selected.\r Once enabled, this bit cannot be disabled, except after a LSE failure detection (LSECSSD\r =1). In that case the software must disable the LSECSSON bit." + bit_offset: 5 + bit_size: 1 + - name: LSECSSD + description: "CSS on LSE failure Detection\r Set by hardware to indicate when a failure is detected by the clock security system\r on the external 32 kHz oscillator (LSE):" + bit_offset: 6 + bit_size: 1 + - name: RTCSEL + description: "RTC clock source selection\r Set by software to select the clock source for the RTC as follows:\r Once the RTC clock source is selected, it cannot be changed anymore unless the RTC domain is reset, or unless a failure is detected on LSE (LSECSSD is set). The RTCRST bit can be used to reset this bitfield to 00." + bit_offset: 8 + bit_size: 2 + enum: RTCSEL + - name: RTCEN + description: "RTC clock enable\r Set and cleared by software. The bit enables clock to RTC and TAMP." + bit_offset: 15 + bit_size: 1 + - name: RTCRST + description: "RTC domain software reset\r Set and cleared by software to reset the RTC domain:" + bit_offset: 16 + bit_size: 1 + - name: LSCOEN + description: "Low-speed clock output (LSCO) enable\r Set and cleared by software." + bit_offset: 24 + bit_size: 1 + - name: LSCOSEL + description: "Low-speed clock output selection\r Set and cleared by software to select the low-speed output clock:" + bit_offset: 25 + bit_size: 1 + enum: LSCOSEL +fieldset/CSR2: + description: RCC control/status register 2 + fields: + - name: LSION + description: "LSI oscillator enable\r Set and cleared by software to enable/disable the LSI oscillator:" + bit_offset: 0 + bit_size: 1 + - name: LSIRDY + description: "LSI oscillator ready\r Set and cleared by hardware to indicate when the LSI oscillator is ready (stable):\r After the LSION bit is cleared, LSIRDY goes low after 3 LSI oscillator clock cycles. This bit can be set even if LSION = 0 if the LSI is requested by the Clock Security System on LSE, by the Independent Watchdog or by the RTC." + bit_offset: 1 + bit_size: 1 + - name: RMVF + description: "Remove reset flags\r Set by software to clear the reset flags." + bit_offset: 23 + bit_size: 1 + - name: OBLRSTF + description: "Option byte loader reset flag\r Set by hardware when a reset from the Option byte loading occurs.\r Cleared by setting the RMVF bit." + bit_offset: 25 + bit_size: 1 + - name: PINRSTF + description: "Pin reset flag\r Set by hardware when a reset from the NRST pin occurs.\r Cleared by setting the RMVF bit." + bit_offset: 26 + bit_size: 1 + - name: PWRRSTF + description: "BOR or POR/PDR flag\r Set by hardware when a BOR or POR/PDR occurs.\r Cleared by setting the RMVF bit." + bit_offset: 27 + bit_size: 1 + - name: SFTRSTF + description: "Software reset flag\r Set by hardware when a software reset occurs.\r Cleared by setting the RMVF bit." + bit_offset: 28 + bit_size: 1 + - name: IWDGRSTF + description: "Independent window watchdog reset flag\r Set by hardware when an independent watchdog reset domain occurs.\r Cleared by setting the RMVF bit." + bit_offset: 29 + bit_size: 1 + - name: WWDGRSTF + description: "Window watchdog reset flag\r Set by hardware when a window watchdog reset occurs.\r Cleared by setting the RMVF bit." + bit_offset: 30 + bit_size: 1 + - name: LPWRRSTF + description: "Low-power reset flag\r Set by hardware when a reset occurs due to illegal Stop, or Standby, or Shutdown mode entry.\r Cleared by setting the RMVF bit.\r This operates only if nRST_STOP, or nRST_STDBY or nRST_SHDW option bits are cleared." + bit_offset: 31 + bit_size: 1 +fieldset/ICSCR: + description: RCC internal clock source calibration register + fields: + - name: HSICAL + description: "HSI48 clock calibration\r This bitfield directly acts on the HSI48 clock frequency. Its value is a sum of an internal factory-programmed number and the value of the HSITRIM[6:0] bitfield. In the factory, the internal number is set to calibrate the HSI48 clock frequency to 48 MHz (with HSITRIM[6:0] left at its reset value). Refer to the device datasheet for HSI48 calibration accuracy and for the frequency trimming granularity.\r Note: The trimming effect presents discontinuities at HSICAL[7:0] multiples of 64." + bit_offset: 0 + bit_size: 8 + - name: HSITRIM + description: "HSI48 clock trimming\r The value of this bitfield contributes to the HSICAL[7:0] bitfield value.\r It allows HSI48 clock frequency user trimming.\r The HSI48 frequency accuracy as stated in the device datasheet applies when this bitfield is left at its reset value." + bit_offset: 8 + bit_size: 7 +fieldset/GPIOENR: + description: RCC I/O port clock enable register + fields: + - name: GPIOAEN + description: "I/O port A clock enable\r This bit is set and cleared by software." + bit_offset: 0 + bit_size: 1 + - name: GPIOBEN + description: "I/O port B clock enable\r This bit is set and cleared by software." + bit_offset: 1 + bit_size: 1 + - name: GPIOCEN + description: "I/O port C clock enable\r This bit is set and cleared by software." + bit_offset: 2 + bit_size: 1 + - name: GPIODEN + description: "I/O port D clock enable\r This bit is set and cleared by software." + bit_offset: 3 + bit_size: 1 + - name: GPIOFEN + description: "I/O port F clock enable\r This bit is set and cleared by software." + bit_offset: 5 + bit_size: 1 +fieldset/GPIORSTR: + description: RCC I/O port reset register + fields: + - name: GPIOARST + description: "I/O port A reset\r This bit is set and cleared by software." + bit_offset: 0 + bit_size: 1 + - name: GPIOBRST + description: "I/O port B reset\r This bit is set and cleared by software." + bit_offset: 1 + bit_size: 1 + - name: GPIOCRST + description: "I/O port C reset\r This bit is set and cleared by software." + bit_offset: 2 + bit_size: 1 + - name: GPIODRST + description: "I/O port D reset\r This bit is set and cleared by software." + bit_offset: 3 + bit_size: 1 + - name: GPIOFRST + description: "I/O port F reset\r This bit is set and cleared by software." + bit_offset: 5 + bit_size: 1 +fieldset/GPIOSMENR: + description: RCC I/O port in Sleep mode clock enable register + fields: + - name: GPIOASMEN + description: "I/O port A clock enable during Sleep mode\r Set and cleared by software." + bit_offset: 0 + bit_size: 1 + - name: GPIOBSMEN + description: "I/O port B clock enable during Sleep mode\r Set and cleared by software." + bit_offset: 1 + bit_size: 1 + - name: GPIOCSMEN + description: "I/O port C clock enable during Sleep mode\r Set and cleared by software." + bit_offset: 2 + bit_size: 1 + - name: GPIODSMEN + description: "I/O port D clock enable during Sleep mode\r Set and cleared by software." + bit_offset: 3 + bit_size: 1 + - name: GPIOFSMEN + description: "I/O port F clock enable during Sleep mode\r Set and cleared by software." + bit_offset: 5 + bit_size: 1 +enum/ADCSEL: + bit_size: 2 + variants: + - name: SYSCLK + description: System clock + value: 0 + - name: HSIKER + description: HSIKER + value: 2 +enum/HPRE: + bit_size: 4 + variants: + - name: Div1 + description: SYSCLK not divided + value: 0 + - name: Div2 + description: SYSCLK is divided by 2 + value: 8 + - name: Div4 + description: SYSCLK is divided by 4 + value: 9 + - name: Div8 + description: SYSCLK is divided by 8 + value: 10 + - name: Div16 + description: SYSCLK is divided by 16 + value: 11 + - name: Div64 + description: SYSCLK is divided by 64 + value: 12 + - name: Div128 + description: SYSCLK is divided by 128 + value: 13 + - name: Div256 + description: SYSCLK is divided by 256 + value: 14 + - name: Div512 + description: SYSCLK is divided by 512 + value: 15 +enum/HSIDIV: + bit_size: 3 + variants: + - name: Div1 + description: HSI clock is not divided + value: 0 + - name: Div2 + description: HSI clock is divided by 2 + value: 1 + - name: Div4 + description: HSI clock is divided by 4 + value: 2 + - name: Div8 + description: HSI clock is divided by 8 + value: 3 + - name: Div16 + description: HSI clock is divided by 16 + value: 4 + - name: Div32 + description: HSI clock is divided by 32 + value: 5 + - name: Div64 + description: HSI clock is divided by 64 + value: 6 + - name: Div128 + description: HSI clock is divided by 128 + value: 7 +enum/HSIKERDIV: + bit_size: 3 + variants: + - name: Div1 + description: "1" + value: 0 + - name: Div2 + description: "2" + value: 1 + - name: Div3 + description: 3 (reset value) + value: 2 + - name: Div4 + description: "4" + value: 3 + - name: Div5 + description: "5" + value: 4 + - name: Div6 + description: "6" + value: 5 + - name: Div7 + description: "7" + value: 6 + - name: Div8 + description: "8" + value: 7 +enum/I2C1SEL: + bit_size: 2 + variants: + - name: PCLK + description: PCLK + value: 0 + - name: SYSCLK + description: SYSCLK + value: 1 + - name: HSIKER + description: HSIKER + value: 2 +enum/I2S1SEL: + bit_size: 2 + variants: + - name: SYSCLK + description: SYSCLK + value: 0 + - name: HSIKER + description: HSIKER + value: 2 + - name: I2S_CKIN + description: I2S_CKIN + value: 3 +enum/LSCOSEL: + bit_size: 1 + variants: + - name: LSI + description: LSI + value: 0 + - name: LSE + description: LSE + value: 1 +enum/LSEDRV: + bit_size: 2 + variants: + - name: Low + description: Low driving capability + value: 0 + - name: MediumLow + description: Medium low driving capability + value: 1 + - name: MediumHigh + description: Medium high driving capability + value: 2 + - name: High + description: High driving capability + value: 3 +enum/MCOPRE: + bit_size: 4 + variants: + - name: Div1 + description: MCO2 not divided + value: 0 + - name: Div2 + description: MCO clock is divided by 2 + value: 1 + - name: Div4 + description: MCO clock is divided by 4 + value: 2 + - name: Div8 + description: MCO clock is divided by 8 + value: 3 + - name: Div16 + description: MCO clock is divided divided by 16 + value: 4 + - name: Div32 + description: MCO clock is divided divided by 32 + value: 5 + - name: Div64 + description: MCO clock is divided divided by 64 + value: 6 + - name: Div128 + description: MCO clock is divided divided by 128 + value: 7 +enum/MCOSEL: + bit_size: 4 + variants: + - name: NoClock + description: "No clock, MCO output disabled" + value: 0 + - name: SYSCLK + description: SYSCLK selected as MCO source + value: 1 + - name: HSI48 + description: HSI48 selected as MCO source + value: 3 + - name: HSE + description: HSE selected as MCO source + value: 4 + - name: LSI + description: LSI selected as MCO source + value: 6 + - name: LSE + description: LSE selected as MCO source + value: 7 +enum/PPRE: + bit_size: 3 + variants: + - name: Div1 + description: HCLK not divided + value: 0 + - name: Div2 + description: HCLK is divided by 2 + value: 4 + - name: Div4 + description: HCLK is divided by 4 + value: 5 + - name: Div8 + description: HCLK is divided by 8 + value: 6 + - name: Div16 + description: HCLK is divided by 16 + value: 7 +enum/RTCSEL: + bit_size: 2 + variants: + - name: NoClock + description: No clock used as RTC clock + value: 0 + - name: LSE + description: LSE used as RTC clock + value: 1 + - name: LSI + description: LSI used as RTC clock + value: 2 + - name: HSE_Div32 + description: HSE divided by 32 used as RTC clock + value: 3 +enum/SW: + bit_size: 3 + variants: + - name: HSI + description: HSI selected as system clock + value: 0 + - name: HSE + description: HSE selected as system clock + value: 1 + - name: LSI + description: LSI selected as system clock + value: 3 + - name: LSE + description: LSE selected as system clock + value: 4 +enum/SYSDIV: + bit_size: 3 + variants: + - name: Div1 + description: "1" + value: 0 + - name: Div2 + description: "2" + value: 1 + - name: Div3 + description: 3 (reset value) + value: 2 + - name: Div4 + description: "4" + value: 3 + - name: Div5 + description: "5" + value: 4 + - name: Div6 + description: "6" + value: 5 + - name: Div7 + description: "7" + value: 6 + - name: Div8 + description: "8" + value: 7 +enum/USART1SEL: + bit_size: 2 + variants: + - name: PCLK + description: PCLK + value: 0 + - name: SYSCLK + description: SYSCLK + value: 1 + - name: HSIKER + description: HSIKER + value: 2 + - name: LSE + description: LSE + value: 3 diff --git a/data/registers/syscfg_c0.yaml b/data/registers/syscfg_c0.yaml new file mode 100644 index 0000000..5c607cb --- /dev/null +++ b/data/registers/syscfg_c0.yaml @@ -0,0 +1,516 @@ +--- +block/SYSCFG: + description: register block + items: + - name: CFGR1 + description: configuration register 1 + byte_offset: 0 + fieldset: CFGR1 + - name: CFGR2 + description: configuration register 2 + byte_offset: 24 + fieldset: CFGR2 + - name: CFGR3 + description: configuration register 3 + byte_offset: 60 + fieldset: CFGR3 + - name: ITLINE0 + description: interrupt line 0 status register + byte_offset: 128 + access: Read + fieldset: ITLINE0 + - name: ITLINE2 + description: interrupt line 2 status register + byte_offset: 136 + access: Read + fieldset: ITLINE2 + - name: ITLINE3 + description: interrupt line 3 status register + byte_offset: 140 + access: Read + fieldset: ITLINE3 + - name: ITLINE4 + description: interrupt line 4 status register + byte_offset: 144 + access: Read + fieldset: ITLINE4 + - name: ITLINE5 + description: interrupt line 5 status register + byte_offset: 148 + access: Read + fieldset: ITLINE5 + - name: ITLINE6 + description: interrupt line 6 status register + byte_offset: 152 + access: Read + fieldset: ITLINE6 + - name: ITLINE7 + description: interrupt line 7 status register + byte_offset: 156 + access: Read + fieldset: ITLINE7 + - name: ITLINE9 + description: interrupt line 9 status register + byte_offset: 164 + access: Read + fieldset: ITLINE9 + - name: ITLINE10 + description: interrupt line 10 status register + byte_offset: 168 + access: Read + fieldset: ITLINE10 + - name: ITLINE11 + description: interrupt line 11 status register + byte_offset: 172 + access: Read + fieldset: ITLINE11 + - name: ITLINE12 + description: interrupt line 12 status register + byte_offset: 176 + access: Read + fieldset: ITLINE12 + - name: ITLINE13 + description: interrupt line 13 status register + byte_offset: 180 + access: Read + fieldset: ITLINE13 + - name: ITLINE14 + description: interrupt line 14 status register + byte_offset: 184 + access: Read + fieldset: ITLINE14 + - name: ITLINE16 + description: interrupt line 16 status register + byte_offset: 192 + access: Read + fieldset: ITLINE16 + - name: ITLINE19 + description: interrupt line 19 status register + byte_offset: 204 + access: Read + fieldset: ITLINE19 + - name: ITLINE21 + description: interrupt line 21 status register + byte_offset: 212 + access: Read + fieldset: ITLINE21 + - name: ITLINE22 + description: interrupt line 22 status register + byte_offset: 216 + access: Read + fieldset: ITLINE22 + - name: ITLINE23 + description: interrupt line 23 status register + byte_offset: 220 + access: Read + fieldset: ITLINE23 + - name: ITLINE25 + description: interrupt line 25 status register + byte_offset: 228 + access: Read + fieldset: ITLINE25 + - name: ITLINE27 + description: interrupt line 27 status register + byte_offset: 236 + access: Read + fieldset: ITLINE27 + - name: ITLINE28 + description: interrupt line 28 status register + byte_offset: 240 + access: Read + fieldset: ITLINE28 +fieldset/CFGR1: + description: configuration register 1 + fields: + - name: MEM_MODE + description: "Memory mapping selection bits\r This bitfield controlled by software selects the memory internally mapped at the address 0x0000 0000. Its reset value is determined by the boot mode configuration. Refer to for more details.\r x0: Main Flash memory" + bit_offset: 0 + bit_size: 2 + enum: MEM_MODE + - name: PA11_RMP + description: "PA11 pin remapping\r This bit is set and cleared by software. When set, it remaps the PA11 pin to operate as PA9 GPIO port, instead as PA11 GPIO port." + bit_offset: 3 + bit_size: 1 + - name: PA12_RMP + description: "PA12 pin remapping\r This bit is set and cleared by software. When set, it remaps the PA12 pin to operate as PA10 GPIO port, instead as PA12 GPIO port." + bit_offset: 4 + bit_size: 1 + - name: IR_POL + description: IR output polarity selection + bit_offset: 5 + bit_size: 1 + - name: IR_MOD + description: "IR Modulation Envelope signal selection\r This bitfield selects the signal for IR modulation envelope:" + bit_offset: 6 + bit_size: 2 + enum: IR_MOD + - name: I2C_PB6_FMP + description: "Fast Mode Plus (FM+) enable for PB6\r This bit is set and cleared by software. It enables I2C FM+ driving capability on PB6 I/O port.\r With this bit in disable state, the I2C FM+ driving capability on this I/O port can be enabled through one of I2Cx_FMP bits. When I2C FM+ is enabled, the speed control is ignored." + bit_offset: 16 + bit_size: 1 + - name: I2C_PB7_FMP + description: "Fast Mode Plus (FM+) enable for PB7\r This bit is set and cleared by software. It enables I2C FM+ driving capability on PB7 I/O port.\r With this bit in disable state, the I2C FM+ driving capability on this I/O port can be enabled through one of I2Cx_FMP bits. When I2C FM+ is enabled, the speed control is ignored." + bit_offset: 17 + bit_size: 1 + - name: I2C_PB8_FMP + description: "Fast Mode Plus (FM+) enable for PB8\r This bit is set and cleared by software. It enables I2C FM+ driving capability on PB8 I/O port.\r With this bit in disable state, the I2C FM+ driving capability on this I/O port can be enabled through one of I2Cx_FMP bits. When I2C FM+ is enabled, the speed control is ignored." + bit_offset: 18 + bit_size: 1 + - name: I2C_PB9_FMP + description: "Fast Mode Plus (FM+) enable for PB9\r This bit is set and cleared by software. It enables I2C FM+ driving capability on PB9 I/O port.\r With this bit in disable state, the I2C FM+ driving capability on this I/O port can be enabled through one of I2Cx_FMP bits. When I2C FM+ is enabled, the speed control is ignored." + bit_offset: 19 + bit_size: 1 + - name: I2C1_FMP + description: "Fast Mode Plus (FM+) enable for I2C1\r This bit is set and cleared by software. It enables I2C FM+ driving capability on I/O ports configured as I2C1 through GPIOx_AFR registers.\r With this bit in disable state, the I2C FM+ driving capability on I/O ports configured as I2C1 can be enabled through their corresponding I2Cx_FMP bit. When I2C FM+ is enabled, the speed control is ignored." + bit_offset: 20 + bit_size: 1 + - name: I2C_PA9_FMP + description: "Fast Mode Plus (FM+) enable for PA9\r This bit is set and cleared by software. It enables I2C FM+ driving capability on PA9 I/O port.\r With this bit in disable state, the I2C FM+ driving capability on this I/O port can be enabled through one of I2Cx_FMP bits. When I2C FM+ is enabled, the speed control is ignored." + bit_offset: 22 + bit_size: 1 + - name: I2C_PA10_FMP + description: "Fast Mode Plus (FM+) enable for PA10\r This bit is set and cleared by software. It enables I2C FM+ driving capability on PA10 I/O port.\r With this bit in disable state, the I2C FM+ driving capability on this I/O port can be enabled through one of I2Cx_FMP bits. When I2C FM+ is enabled, the speed control is ignored." + bit_offset: 23 + bit_size: 1 + - name: I2C_PC14_FMP + description: "Fast Mode Plus (FM+) enable for PC14\r This bit is set and cleared by software. It enables I2C FM+ driving capability on PC14 I/O port.\r With this bit in disable state, the I2C FM+ driving capability on this I/O port can be enabled through one of I2Cx_FMP bits. When I2C FM+ is enabled, the speed control is ignored." + bit_offset: 24 + bit_size: 1 +fieldset/CFGR2: + description: configuration register 2 + fields: + - name: LOCKUP_LOCK + description: "Cortex�-M0+ LOCKUP enable\r This bit is set by software and cleared by system reset. When set, it enables the connection of Cortex�-M0+ LOCKUP (HardFault) output to the TIM1/16/17 Break input." + bit_offset: 0 + bit_size: 1 +fieldset/CFGR3: + description: configuration register 3 + fields: + - name: PINMUX0 + description: "Pin GPIO multiplexer 0\r This bit is set by software and cleared by system reset. It assigns a GPIO to a pin.\r 1x: Reserved\r Pin F2 of WLCSP14 package GPIO assignment\r 1x: Reserved" + bit_offset: 0 + bit_size: 2 + enum: PINMUX0 + - name: PINMUX1 + description: "Pin GPIO multiplexer 1\r This bit is set by software and cleared by system reset. It assigns a GPIO to a pin.\r 1x: Reserved" + bit_offset: 2 + bit_size: 2 + enum: PINMUX1 + - name: PINMUX2 + description: "Pin GPIO multiplexer 2\r This bit is set by software and cleared by system reset. It assigns a GPIO to a pin.\r 1x: Reserved\r 1x: Reserved" + bit_offset: 4 + bit_size: 2 + enum: PINMUX2 + - name: PINMUX3 + description: "Pin GPIO multiplexer 3\r This bit is set by software and cleared by system reset. It assigns a GPIO to a pin.\r 1x: Reserved" + bit_offset: 6 + bit_size: 2 + enum: PINMUX3 + - name: PINMUX4 + description: "Pin GPIO multiplexer 4\r This bit is set by software and cleared by system reset. It assigns a GPIO to a pin.\r 1x: Reserved\r 1x: Reserved" + bit_offset: 8 + bit_size: 2 + enum: PINMUX4 + - name: PINMUX5 + description: "Pin GPIO multiplexer 5\r This bit is set by software and cleared by system reset. It assigns a GPIO to a pin.\r 1x: Reserved" + bit_offset: 10 + bit_size: 2 + enum: PINMUX5 +fieldset/ITLINE0: + description: interrupt line 0 status register + fields: + - name: WWDG + description: Window watchdog interrupt pending flag + bit_offset: 0 + bit_size: 1 +fieldset/ITLINE10: + description: interrupt line 10 status register + fields: + - name: DMA1_CH2 + description: DMA1 channel 2 interrupt request pending + bit_offset: 0 + bit_size: 1 + - name: DMA1_CH3 + description: DMA1 channel 3 interrupt request pending + bit_offset: 1 + bit_size: 1 +fieldset/ITLINE11: + description: interrupt line 11 status register + fields: + - name: DMAMUX + description: DMAMUX interrupt request pending + bit_offset: 0 + bit_size: 1 +fieldset/ITLINE12: + description: interrupt line 12 status register + fields: + - name: ADC + description: ADC interrupt request pending + bit_offset: 0 + bit_size: 1 +fieldset/ITLINE13: + description: interrupt line 13 status register + fields: + - name: TIM1_CCU + description: Timer 1 commutation interrupt request pending + bit_offset: 0 + bit_size: 1 + - name: TIM1_TRG + description: Timer 1 trigger interrupt request pending + bit_offset: 1 + bit_size: 1 + - name: TIM1_UPD + description: Timer 1 update interrupt request pending + bit_offset: 2 + bit_size: 1 + - name: TIM1_BRK + description: Timer 1 break interrupt request pending + bit_offset: 3 + bit_size: 1 +fieldset/ITLINE14: + description: interrupt line 14 status register + fields: + - name: TIM1_CC + description: Timer 1 capture compare interrupt request pending + bit_offset: 0 + bit_size: 1 +fieldset/ITLINE16: + description: interrupt line 16 status register + fields: + - name: TIM3 + description: Timer 3 interrupt request pending + bit_offset: 0 + bit_size: 1 +fieldset/ITLINE19: + description: interrupt line 19 status register + fields: + - name: TIM14 + description: Timer 14 interrupt request pending + bit_offset: 0 + bit_size: 1 +fieldset/ITLINE2: + description: interrupt line 2 status register + fields: + - name: RTC + description: RTC interrupt request pending (EXTI line 19) + bit_offset: 1 + bit_size: 1 +fieldset/ITLINE21: + description: interrupt line 21 status register + fields: + - name: TIM16 + description: Timer 16 interrupt request pending + bit_offset: 0 + bit_size: 1 +fieldset/ITLINE22: + description: interrupt line 22 status register + fields: + - name: TIM17 + description: Timer 17 interrupt request pending + bit_offset: 0 + bit_size: 1 +fieldset/ITLINE23: + description: interrupt line 23 status register + fields: + - name: I2C1 + description: "I2C1 interrupt request pending, combined with EXTI line 23" + bit_offset: 0 + bit_size: 1 +fieldset/ITLINE25: + description: interrupt line 25 status register + fields: + - name: SPI1 + description: SPI1 interrupt request pending + bit_offset: 0 + bit_size: 1 +fieldset/ITLINE27: + description: interrupt line 27 status register + fields: + - name: USART1 + description: "USART1 interrupt request pending, combined with EXTI line 25" + bit_offset: 0 + bit_size: 1 +fieldset/ITLINE28: + description: interrupt line 28 status register + fields: + - name: USART2 + description: USART2 interrupt request pending (EXTI line 26) + bit_offset: 0 + bit_size: 1 +fieldset/ITLINE3: + description: interrupt line 3 status register + fields: + - name: FLASH_ITF + description: Flash interface interrupt request pending + bit_offset: 1 + bit_size: 1 +fieldset/ITLINE4: + description: interrupt line 4 status register + fields: + - name: RCC + description: Reset and clock control interrupt request pending + bit_offset: 0 + bit_size: 1 +fieldset/ITLINE5: + description: interrupt line 5 status register + fields: + - name: EXTI + description: EXTI + bit_offset: 0 + bit_size: 1 + array: + len: 2 + stride: 1 +fieldset/ITLINE6: + description: interrupt line 6 status register + fields: + - name: EXTI + description: EXTI + bit_offset: 0 + bit_size: 1 + array: + len: 2 + stride: 1 +fieldset/ITLINE7: + description: interrupt line 7 status register + fields: + - name: EXTI + description: EXTI + bit_offset: 0 + bit_size: 1 + array: + len: 12 + stride: 1 +fieldset/ITLINE9: + description: interrupt line 9 status register + fields: + - name: DMA1_CH1 + description: DMA1 channel 1interrupt request pending + bit_offset: 0 + bit_size: 1 +enum/IR_MOD: + bit_size: 2 + variants: + - name: TIM16 + description: TIM16 + value: 0 + - name: USART1 + description: USART1 + value: 1 + - name: USART2 + description: USART2 + value: 2 +enum/MEM_MODE: + bit_size: 2 + variants: + - name: FLASH + description: System Flash memory + value: 1 + - name: SRAM + description: Embedded SRAM + value: 3 +enum/PINMUX0: + bit_size: 2 + variants: + - name: B_0x0_STM32C011X___GPIO_ASSIGNED_TO_SO8_PIN_1 + description: PB7 + value: 0 + - name: B_0x0_STM32C031X___GPIO_ASSIGNED_TO_WLCSP14_PIN_F2 + description: PA1 + value: 0 + - name: B_0x1_STM32C011X___GPIO_ASSIGNED_TO_SO8_PIN_1 + description: PC14 + value: 1 + - name: B_0x1_STM32C031X___GPIO_ASSIGNED_TO_WLCSP14_PIN_F2 + description: PA2 + value: 1 +enum/PINMUX1: + bit_size: 2 + variants: + - name: B_0x0_STM32C011X___GPIO_ASSIGNED_TO_SO8_PIN_4 + description: PF2 + value: 0 + - name: B_0x0_STM32C031X___GPIO_ASSIGNED_TO_WLCSP14_PIN_G3 + description: PF2 + value: 0 + - name: B_0x1_STM32C011X___GPIO_ASSIGNED_TO_SO8_PIN_4 + description: PA0 + value: 1 + - name: B_0x1_STM32C031X___GPIO_ASSIGNED_TO_WLCSP14_PIN_G3 + description: PA0 + value: 1 + - name: B_0x2_STM32C011X___GPIO_ASSIGNED_TO_SO8_PIN_4 + description: PA1 + value: 2 + - name: B_0x3_STM32C011X___GPIO_ASSIGNED_TO_SO8_PIN_4 + description: PA2 + value: 3 +enum/PINMUX2: + bit_size: 2 + variants: + - name: B_0x0_STM32C011X___GPIO_ASSIGNED_TO_SO8_PIN_5 + description: PA8 + value: 0 + - name: B_0x0_STM32C031X___GPIO_ASSIGNED_TO_WLCSP14_PIN_J1 + description: PA8 + value: 0 + - name: B_0x1_STM32C011X___GPIO_ASSIGNED_TO_SO8_PIN_5 + description: PA11 + value: 1 + - name: B_0x1_STM32C031X___GPIO_ASSIGNED_TO_WLCSP14_PIN_J1 + description: PA11 + value: 1 +enum/PINMUX3: + bit_size: 2 + variants: + - name: B_0x0_STM32C011X___GPIO_ASSIGNED_TO_SO8_PIN_8 + description: PA14 + value: 0 + - name: B_0x0_STM32C031X___GPIO_ASSIGNED_TO_WLCSP14_PIN_H2 + description: PA5 + value: 0 + - name: B_0x1_STM32C011X___GPIO_ASSIGNED_TO_SO8_PIN_8 + description: PB6 + value: 1 + - name: B_0x1_STM32C031X___GPIO_ASSIGNED_TO_WLCSP14_PIN_H2 + description: PA6 + value: 1 + - name: B_0x2_STM32C011X___GPIO_ASSIGNED_TO_SO8_PIN_8 + description: PC15 + value: 2 +enum/PINMUX4: + bit_size: 2 + variants: + - name: B_0x0_STM32C011X___GPIO_ASSIGNED_TO_WLCSP12_PIN_E2 + description: PA7 + value: 0 + - name: B_0x0_STM32C031X___GPIO_ASSIGNED_TO_WLCSP14_PIN_G1 + description: PA7 + value: 0 + - name: B_0x1_STM32C011X___GPIO_ASSIGNED_TO_WLCSP12_PIN_E2 + description: PA12 + value: 1 + - name: B_0x1_STM32C031X___GPIO_ASSIGNED_TO_WLCSP14_PIN_G1 + description: PA12 + value: 1 +enum/PINMUX5: + bit_size: 2 + variants: + - name: B_0x0_STM32C011X___GPIO_ASSIGNED_TO_WLCSP12_PIN_F1 + description: PA3 + value: 0 + - name: B_0x0_STM32C031X___GPIO_ASSIGNED_TO_WLCSP14_PIN_J3 + description: PA3 + value: 0 + - name: B_0x1_STM32C011X___GPIO_ASSIGNED_TO_WLCSP12_PIN_F1 + description: PA4 + value: 1 + - name: B_0x1_STM32C031X___GPIO_ASSIGNED_TO_WLCSP14_PIN_J3 + description: PA4 + value: 1 + - name: B_0x2_STM32C011X___GPIO_ASSIGNED_TO_WLCSP12_PIN_F1 + description: PA5 + value: 2 + - name: B_0x3_STM32C011X___GPIO_ASSIGNED_TO_WLCSP12_PIN_F1 + description: PA6 + value: 3 diff --git a/src/chips.rs b/src/chips.rs index 635130f..783e55d 100644 --- a/src/chips.rs +++ b/src/chips.rs @@ -77,7 +77,7 @@ fn chip_name_from_package_name(x: &str) -> String { (regex!("^(STM32L1....).x([AX])$"), "$1-$2"), (regex!("^(STM32G0....).xN$"), "$1"), (regex!("^(STM32F412..).xP$"), "$1"), - (regex!("^(STM32L4....).xP$"), "$1"), + (regex!("^(STM32L4....).x[PS]$"), "$1"), (regex!("^(STM32WB....).x[AE]$"), "$1"), (regex!("^(STM32G0....).xN$"), "$1"), (regex!("^(STM32L5....).x[PQ]$"), "$1"), @@ -163,6 +163,7 @@ impl PeriMatcher { ("STM32H7.*:ADC_COMMON:.*", ("adccommon", "v4", "ADC_COMMON")), ("STM32H7.*:ADC3_COMMON:.*", ("adccommon", "v4", "ADC_COMMON")), (".*:DCMI:.*", ("dcmi", "v1", "DCMI")), + ("STM32C0.*:SYSCFG:.*", ("syscfg", "c0", "SYSCFG")), ("STM32F0.*:SYSCFG:.*", ("syscfg", "f0", "SYSCFG")), ("STM32F2.*:SYSCFG:.*", ("syscfg", "f2", "SYSCFG")), ("STM32F3.*:SYSCFG:.*", ("syscfg", "f3", "SYSCFG")), @@ -220,6 +221,7 @@ impl PeriMatcher { // # USB OTG (".*:USB_OTG_FS:otgfs1_.*", ("otg", "v1", "OTG")), (".*:USB_OTG_HS:otghs1_.*", ("otg", "v1", "OTG")), + ("STM32C0.*:RCC:.*", ("rcc", "c0", "RCC")), ("STM32F0.*:RCC:.*", ("rcc", "f0", "RCC")), ("STM32F100.*:RCC:.*", ("rcc", "f100", "RCC")), ("STM32F10[123].*:RCC:.*", ("rcc", "f1", "RCC")), @@ -245,6 +247,7 @@ impl PeriMatcher { ("STM32F3.*:SPI[1234]:.*", ("spi", "v2", "SPI")), ("STM32F1.*:AFIO:.*", ("afio", "f1", "AFIO")), ("STM32L5.*:EXTI:.*", ("exti", "l5", "EXTI")), + ("STM32C0.*:EXTI:.*", ("exti", "c0", "EXTI")), ("STM32G0.*:EXTI:.*", ("exti", "g0", "EXTI")), ("STM32H7.*:EXTI:.*", ("exti", "h7", "EXTI")), ("STM32U5.*:EXTI:.*", ("exti", "u5", "EXTI")), @@ -254,6 +257,7 @@ impl PeriMatcher { (".*:EXTI:.*", ("exti", "v1", "EXTI")), ("STM32L0.*:CRS:.*", ("crs", "l0", "CRS")), (".*SDMMC:sdmmc2_v1_0", ("sdmmc", "v2", "SDMMC")), + ("STM32C0.*:PWR:.*", ("pwr", "c0", "PWR")), ("STM32G0.*:PWR:.*", ("pwr", "g0", "PWR")), ("STM32G4.*:PWR:.*", ("pwr", "g4", "PWR")), ("STM32H7(42|43|53|50).*:PWR:.*", ("pwr", "h7", "PWR")), @@ -282,6 +286,7 @@ impl PeriMatcher { ("STM32U5.*:FLASH:.*", ("flash", "u5", "FLASH")), ("STM32WB.*:FLASH:.*", ("flash", "wb", "FLASH")), ("STM32WL.*:FLASH:.*", ("flash", "wl", "FLASH")), + ("STM32C0.*:FLASH:.*", ("flash", "c0", "FLASH")), ("STM32G0.*:FLASH:.*", ("flash", "g0", "FLASH")), ("STM32F107.*:ETH:.*", ("eth", "v1a", "ETH")), ("STM32F[24].*:ETH:.*", ("eth", "v1b", "ETH")), @@ -305,6 +310,7 @@ impl PeriMatcher { ("STM32F3.*:DBGMCU:.*", ("dbgmcu", "f3", "DBGMCU")), ("STM32F4.*:DBGMCU:.*", ("dbgmcu", "f4", "DBGMCU")), ("STM32F7.*:DBGMCU:.*", ("dbgmcu", "f7", "DBGMCU")), + ("STM32C0.*:DBGMCU:.*", ("dbgmcu", "c0", "DBGMCU")), ("STM32G0.*:DBGMCU:.*", ("dbgmcu", "g0", "DBGMCU")), ("STM32G4.*:DBGMCU:.*", ("dbgmcu", "g4", "DBGMCU")), ("STM32H7.*:DBGMCU:.*", ("dbgmcu", "h7", "DBGMCU")), @@ -447,6 +453,22 @@ pub fn parse_groups() -> Result<(HashMap, Vec), anyhow: Ok((chips, chip_groups)) } +static NOPELIST: &[&str] = &[ + // Not supported + "STM32MP", + // Does not exist in ST website. No datasheet, no RM. + "STM32GBK", + "STM32L485", + "STM32U59", + "STM32U5A", + // STM32WxM modules. These are based on a chip that's supported on its own, + // not sure why we want a separate target for it. + "STM32WL5M", + "STM32WB1M", + "STM32WB3M", + "STM32WB5M", +]; + fn parse_group( f: std::path::PathBuf, chips: &mut HashMap, @@ -454,14 +476,10 @@ fn parse_group( ) -> anyhow::Result<()> { let ff = f.file_name().unwrap().to_string_lossy(); - // Not supported - if ff.contains("STM32MP") { - return Ok(()); - } - - // Does not exist in ST website. No datasheet, no RM. - if ff.contains("STM32GBK") || ff.contains("STM32L485") { - return Ok(()); + for nope in NOPELIST { + if ff.contains(nope) { + return Ok(()); + } } let parsed: xml::Mcu = quick_xml::de::from_str(&std::fs::read_to_string(f)?)?; @@ -567,8 +585,12 @@ fn process_group( group.line = Some(group.xml.line.clone()); group.die = Some(group.xml.die.clone()); let rcc_kind = group.ips.values().find(|x| x.name == "RCC").unwrap().version.clone(); - let rcc_block = peri_matcher.match_peri(&format!("{chip_name}:RCC:{rcc_kind}")).unwrap(); - let h = headers.get_for_chip(&chip_name).unwrap(); + let rcc_block = peri_matcher + .match_peri(&format!("{chip_name}:RCC:{rcc_kind}")) + .unwrap_or_else(|| panic!("could not get rcc for {}", &chip_name)); + let h = headers + .get_for_chip(&chip_name) + .unwrap_or_else(|| panic!("could not get header for {}", &chip_name)); let chip_af = &group.ips.values().find(|x| x.name == "GPIO").unwrap().version; let chip_af = chip_af.strip_suffix("_gpio_v1_0").unwrap(); let chip_af = af.0.get(chip_af); diff --git a/src/dma.rs b/src/dma.rs index 4b046e5..cb89925 100644 --- a/src/dma.rs +++ b/src/dma.rs @@ -1,5 +1,7 @@ use std::collections::HashMap; +use anyhow::Context; + mod xml { use serde::Deserialize; @@ -83,7 +85,11 @@ impl DmaChannels { for f in glob::glob("sources/cubedb/mcu/IP/DMA*Modes.xml")? .chain(glob::glob("sources/cubedb/mcu/IP/BDMA*Modes.xml")?) { - let parsed: xml::Ip = quick_xml::de::from_str(&std::fs::read_to_string(f?)?)?; + let f = f?; + if f.to_string_lossy().contains("DMAMUX") { + continue; + } + let parsed: xml::Ip = quick_xml::de::from_str(&std::fs::read_to_string(&f)?).context(format!("{:?}", f))?; let ff = parsed.version.clone(); let is_explicitly_bdma = match parsed.name.as_str() { diff --git a/src/docs.rs b/src/docs.rs index 72a0cc3..4adb768 100644 --- a/src/docs.rs +++ b/src/docs.rs @@ -134,6 +134,7 @@ fn parse_document_type(t: &str) -> &'static str { "Errata sheet" => "errata_sheet", "Application note" => "application_note", "User manual" => "user_manual", + "Data brief" => "data_brief", _ => panic!("Unknown doc type {t}"), } } @@ -145,6 +146,7 @@ fn order_doc_type(t: &str) -> u8 { "datahseet" => 2, // TODO: fix me "errata_sheet" => 3, "application_note" => 4, + "data_brief" => 5, _ => panic!("Unknown doc type {t}"), } } diff --git a/src/interrupts.rs b/src/interrupts.rs index 26a04a8..5773615 100644 --- a/src/interrupts.rs +++ b/src/interrupts.rs @@ -374,6 +374,7 @@ fn valid_signals(peri: &str) -> Vec { ("USB_OTG_FS", &["GLOBAL", "EP1_OUT", "EP1_IN", "WKUP"]), ("USB_OTG_HS", &["GLOBAL", "EP1_OUT", "EP1_IN", "WKUP"]), ("USB", &["LP", "HP", "WKUP"]), + ("GPU2D", &["ER"]), ]; for (prefix, signals) in IRQ_SIGNALS_MAP {